ARECA Raid controller sensor statistics

About

The snmp__areca_ plugin allows the munin monitor to graph the hardware sensors of a ARECA RAID controller. The plugin is able to retrieve the temperatures, the fan speeds and the voltages exported by the ARECA controller via it's SNMP management interface.

Screenshot

Error: Macro Image(Images:snmp__areca_fan-job-day.png, nolink) failed

Attachment Images: snmp__areca_fan-job-day.png does not exist.

Error: Macro Image(Images:snmp__areca_temp-job-day.png, nolink) failed

Attachment Images: snmp__areca_temp-job-day.png does not exist.

Error: Macro Image(Images:snmp__areca_volt-job-day.png, nolink) failed

Attachment Images: snmp__areca_volt-job-day.png does not exist.

Download

snmp__areca_

Installation

1. Make sure the areca controller is accessible via SNMP. A test might be performed by calling snmpwalk -v 1 -c snmp_community ip.add.re.ss
2. Copy or link the snmpareca_ script into your munin-node plugin directory, usually /etc/munin/plugins. The areca script is a wildcard plugin and should therefore be linked as e.g. snmp_192.168.1.100_areca_fan, snmp_192.168.1.100_areca_temp and snmp_192.168.1.100_areca_volt. Adapt the IP address accordingly to the local setup.
3. Configure the munin-node to run the snmpareca_ plugin with the correct snmp community string:

   [snmp_192.168.1.100*]
   community private
   version 1
   

4. Test the plugin by calling munin-run snmp_192.168.1.100_areca_temp config and by executing munin-run snmp_192.168.1.100_areca_temp. Both commands should output sensible data without failing.

Notes

• This plugin unfortunately is not able to correctly autoconfigure itself.

Author

The munin plugin was written by Andreas Thienemann for bawue.net.

License

The code is available as free software under the GPL Version 2.

Bugs and Contact

In case of bugs, please either open a ticket in this Trac instance or write to <andreas (at) bawue (dot) net>.