Index: webserver/example/EnergyMeters/Source/EnergyMeters/Meters.c
===================================================================
--- webserver/example/EnergyMeters/Source/EnergyMeters/Meters.c (revision 53)
+++ webserver/example/EnergyMeters/Source/EnergyMeters/Meters.c (revision 59)
@@ -119,5 +119,5 @@
   /* bits are 0 here */
   /* disable pull-up/down resistors on 2.0, 2.1, 2.3, 2.4 (put binary 10 for all), don't change 2.2! */
-  PINMODE4 |= 0x28A;
+  // dont change anymore :  PINMODE4 |= 0x28A;
 
 
@@ -126,11 +126,11 @@
   IO2_INT_EN_R |= (1<<1); /* enable rising edge interrupt for P2:1 */
   IO2_INT_EN_F &= ~(1<<1); /* disable falling edge interrupt for P2:1 */
-  // P2.2 is not connected!
-  //IO2_INT_EN_R |= (1<<2); /* enable rising edge interrupt for P2:2 */
-  //IO2_INT_EN_F &= ~(1<<2); /* disable falling edge interrupt for P2:2 */
+  IO2_INT_EN_R |= (1<<2); /* enable rising edge interrupt for P2:2 */
+  IO2_INT_EN_F &= ~(1<<2); /* disable falling edge interrupt for P2:2 */
   IO2_INT_EN_R |= (1<<3); /* enable rising edge interrupt for P2:3 */
   IO2_INT_EN_F &= ~(1<<3); /* disable falling edge interrupt for P2:3 */
-  IO2_INT_EN_R |= (1<<4); /* enable rising edge interrupt for P2:4 */
-  IO2_INT_EN_F &= ~(1<<4); /* disable falling edge interrupt for P2:4 */
+  // P2.4 is not connected!
+  //IO2_INT_EN_R |= (1<<4); /* enable rising edge interrupt for P2:4 */
+  //IO2_INT_EN_F &= ~(1<<4); /* disable falling edge interrupt for P2:4 */
 
   VICVectAddr17 = (portLONG) vP2_0_ISR_Wrapper; /* EINT-3 interrupt handler */
Index: webserver/example/EnergyMeters/Source/EnergyMeters/Meters_ISRs.c
===================================================================
--- webserver/example/EnergyMeters/Source/EnergyMeters/Meters_ISRs.c (revision 52)
+++ webserver/example/EnergyMeters/Source/EnergyMeters/Meters_ISRs.c (revision 59)
@@ -46,21 +46,20 @@
     IO2_INT_CLR |= (1<<1);
   }
-  // P0.2 is not connected!
-  //if ((IO2_INT_STAT_R & (1 << 2)) != 0) /* P0.2 interrupt triggered - connector J4, Pin 2*/
-  //{
-  // handleMeterTick(METER_INDEX_EL2);
-  //  IO2_INT_CLR |= (1<<2);
-  //}
-  if ((IO2_INT_STAT_R & (1 << 3)) != 0) /* P0.3 interrupt triggered - connector J4, Pin 3*/
+  if ((IO2_INT_STAT_R & (1 << 2)) != 0) /* P0.3 interrupt triggered - connector J4, Pin 3*/
+  {
+    handleMeterTick(METER_INDEX_EL2);
+    IO2_INT_CLR |= (1<<2);
+  }
+  if ((IO2_INT_STAT_R & (1 << 3)) != 0) /* P0.4 interrupt triggered - connector J4, Pin 4*/
   {
     handleMeterTick(METER_INDEX_AU1);
     IO2_INT_CLR |= (1<<3);
   }
-  if ((IO2_INT_STAT_R & (1 << 4)) != 0) /* P0.4 interrupt triggered - connector J4, Pin 4*/
-  {
-    handleMeterTick(METER_INDEX_AU2);
-    IO2_INT_CLR |= (1<<4);
-  }
-
+  // P0.4 is not connected!
+  //if ((IO2_INT_STAT_R & (1 << 4)) != 0) /* P0.2 interrupt triggered - connector J4, Pin 2*/
+  //{
+  // handleMeterTick(METER_INDEX_AU2);
+  //  IO2_INT_CLR |= (1<<4);
+  //}
   /* Clear the interrupt. */ 
   VICVectAddr = 0;