root/webserver/example/EnergyMeters


Mode:

Legend:

Added
Modified
Copied or renamed
Rev Chgset Date Author Log Message
(edit) @80 [80] 12/27/10 17:07:42 phil - switched baud rate back to 57600
(edit) @79 [79] 11/02/10 17:03:45 phil replaced DAY by LASTDAY in web status
(edit) @78 [78] 11/02/10 16:36:57 phil - hour query gets now read hour - 1 - renamed convertSingleDigit to …
(edit) @77 [77] 10/31/10 13:36:00 phil new tx digit conversion routines
(edit) @76 [76] 10/26/10 19:10:55 phil - hour yield is now not divided by 60, this must be done by the scripts …
(edit) @75 [75] 10/24/10 11:38:27 phil corrected hour yield query data encoding (binary coded hex for hour query)
(edit) @74 [74] 10/23/10 22:09:26 phil - extended range of hourly queries
(edit) @73 [73] 10/23/10 21:39:51 phil - state machine now also does hourly queries - added LASTHOUR entry to web …
(edit) @72 [72] 10/23/10 12:36:15 phil - switched baud rate to 2400 (try to minimize errors) - corrected binary …
(edit) @71 [71] 10/19/10 20:56:18 phil - changed DAY output on webpage to one line - added checksum check for …
(edit) @70 [70] 10/17/10 18:13:03 phil we now query and display the solar yields of the previous days (day - 1) …
(edit) @69 [69] 09/18/10 13:47:23 phil progress update: additional states. now reads sample month yield data
(edit) @68 [68] 09/12/10 19:33:03 phil query time once per minute now works. more detailled output on FSM stuck …
(edit) @67 [67] 09/04/10 17:14:00 phil made 2 byte rx checksum check general (now used for wattage, voltage and …
(edit) @66 [66] 09/04/10 15:30:17 phil introduced 2 byte checksum check for rx momentary power packets, including …
(edit) @65 [65] 09/04/10 12:33:34 phil fixed compilation issue in portmacro.h for new CrossWorks?
(edit) @61 [61] 04/06/10 20:20:57 phil solar power history size now 20 (3 second increments)
(edit) @60 [60] 04/04/10 10:49:44 phil meter value calculation now not in ISR anymore, introduced …
(edit) @59 [59] 03/20/10 13:24:05 phil adaptation to new ETT 4 channel opto I/O board
(edit) @58 [58] 03/07/10 13:35:12 phil - solar history now in reverse direction - do not invalidate whole history …
(edit) @57 [57] 03/07/10 11:21:08 phil completed solar history entries
(edit) @56 [56] 03/07/10 10:45:29 phil - added watt history, SOLAR_WATT_HISTORY_STEPSIZE, …
(edit) @55 [55] 02/27/10 10:38:42 phil - increased cCountBuf to 800 bytes to prevent mem corruption - increased …
(edit) @54 [54] 02/27/10 09:54:56 phil switched some outputs on web page to unsigned in printf
(edit) @53 [53] 02/21/10 13:21:41 phil added watchdog
(edit) @52 [52] 02/20/10 11:31:33 phil changed UIP_ARPTAB_SIZE (from 20 to 30), removed P0.2 (not connected)
(edit) @51 [51] 02/18/10 22:55:34 phil changed UIP_ARPTAB_SIZE (from 8 to 20), changed UIP_UDP_CONNS (10 to …
(edit) @50 [50] 02/14/10 16:25:17 phil added meters AU1 and AU2 (Auxiliary 1 and Auxiliary 2), interrupt handler …
(edit) @49 [49] 02/14/10 14:46:08 phil inserted extra crlf for TSTmeter output
(edit) @48 [48] 02/14/10 14:39:48 phil fixed meter output
(edit) @47 [47] 02/14/10 13:59:45 phil - now three meter entries: TST, GAS, EL1, EL2 - added CurrentTime? to web …
(edit) @46 [46] 02/07/10 11:36:21 phil have now got METER_INDEX_BUTTON and METER_INDEX_GAS with display on page
(edit) @45 [45] 02/07/10 11:28:03 phil example meter (button SPI LOAD) now on web page, removed LCD writing in …
(edit) @44 [44] 02/04/10 20:29:58 phil serial init now only once at startup (not at every solar read error), …
(edit) @43 [43] 02/01/10 22:24:48 phil merge with other version (from laptop): changed handleGasMeterTick() …
(edit) @42 [42] 02/01/10 22:01:35 phil merge with other version (from laptop) - now interrupts for more channels, …
(edit) @41 [41] 02/01/10 19:45:22 phil output of voltages and one meter (gas meter) now works.
(edit) @40 [40] 01/31/10 18:54:41 phil ignore map file and .ld file
(edit) @39 [39] 01/31/10 18:53:49 phil - added output function for Voltages and Wattages to generate_rtos_stats …
(edit) @38 [38] 01/31/10 13:37:46 phil reverted httpd-cgi.c to unmodified state
(edit) @37 [37] 01/31/10 12:44:23 phil - SolarCount? data reading now working. Still hangs sometimes on Rx Data …
(edit) @35 [35] 01/03/10 11:19:00 phil first round now works
(edit) @34 [34] 01/02/10 15:33:13 phil added Code for SolarCount?, works sometimes already! :-)
(edit) @33 [33] 08/17/09 21:35:48 phil always use Fast IO for LCD
(edit) @32 [32] 08/14/09 23:28:59 phil completed the gas meter calculation algorithm
(edit) @31 [31] 08/14/09 17:44:57 phil Renamed solution
(edit) @30 [30] 08/14/09 14:29:20 phil Gas Meter counting finished, with accumulation timer and debounce timer. …
(copy) @29 [29] 08/14/09 13:42:29 phil Renamed Directpry freeRTOSexample to EnergyMeters?
copied from webserver/example/freeRTOSexample:
(edit) @28 [28] 08/14/09 13:40:46 phil Renamed Project to EnergyMeters? in CrossWorks? Project File
Note: See TracRevisionLog for help on using the revision log.