root/webserver/example/freeRTOS/Demo/Common/ethernet/lwIP/netif/FILES

Revision 14, 1.1 kB (checked in by phil, 15 years ago)

added unmodified FreeRTOS package V5.4.1 with only web srv demo source for LPC2368 for CrossWorks?

Line 
1 This directory contains generic network interface device drivers that
2 do not contain any hardware or architecture specific code. The files
3 are:
4
5 etharp.c
6           Implements the ARP (Address Resolution Protocol) over
7           Ethernet. The code in this file should be used together with
8           Ethernet device drivers. Note that this module has been
9           largely made Ethernet independent so you should be able to
10           adapt this for other link layers (such as Firewire).
11
12 ethernetif.c
13           An example of how an Ethernet device driver could look. This
14           file can be used as a "skeleton" for developing new Ethernet
15           network device drivers. It uses the etharp.c ARP code.
16
17 loopif.c
18           An example network interface that shows how a "loopback"
19           interface would work. This is not really intended for actual
20           use, but as a very basic example of how initialization and
21           output functions work.
22
23 slipif.c
24           A generic implementation of the SLIP (Serial Line IP)
25           protocol. It requires a sio (serial I/O) module to work.
26          
27 ppp/      Point-to-Point Protocol stack
Note: See TracBrowser for help on using the browser.