uip.c

Revision 14, 61.4 kB (checked in by phil, 15 years ago)
added unmodified FreeRTOS package V5.4.1 with only web srv demo source for LPC2368 for CrossWorks?

Line
1	#define DEBUG_PRINTF( ... ) /printf(__VA_ARGS__)/
2
3	/**
4	* \defgroup uip The uIP TCP/IP stack
5	* @{
6	*
7	* uIP is an implementation of the TCP/IP protocol stack intended for
8	* small 8-bit and 16-bit microcontrollers.
9	*
10	* uIP provides the necessary protocols for Internet communication,
11	* with a very small code footprint and RAM requirements - the uIP
12	* code size is on the order of a few kilobytes and RAM usage is on
13	* the order of a few hundred bytes.
14	*/
15
16	/**
17	* \file
18	* The uIP TCP/IP stack code.
19	* \author Adam Dunkels <adam@dunkels.com>
20	*/
21
22	/*
23	* Copyright (c) 2001-2003, Adam Dunkels.
24	* All rights reserved.
25	*
26	* Redistribution and use in source and binary forms, with or without
27	* modification, are permitted provided that the following conditions
28	* are met:
29	* 1. Redistributions of source code must retain the above copyright
30	* notice, this list of conditions and the following disclaimer.
31	* 2. Redistributions in binary form must reproduce the above copyright
32	* notice, this list of conditions and the following disclaimer in the
33	* documentation and/or other materials provided with the distribution.
34	* 3. The name of the author may not be used to endorse or promote
35	* products derived from this software without specific prior
36	* written permission.
37	*
38	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
39	* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
40	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
41	* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
42	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
43	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
44	* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
45	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
46	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
47	* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
48	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
49	*
50	* This file is part of the uIP TCP/IP stack.
51	*
52	* $Id: uip.c,v 1.65 2006/06/11 21:46:39 adam Exp $
53	*
54	*/
55
56	/*
57	* uIP is a small implementation of the IP, UDP and TCP protocols (as
58	* well as some basic ICMP stuff). The implementation couples the IP,
59	* UDP, TCP and the application layers very tightly. To keep the size
60	* of the compiled code down, this code frequently uses the goto
61	* statement. While it would be possible to break the uip_process()
62	* function into many smaller functions, this would increase the code
63	* size because of the overhead of parameter passing and the fact that
64	* the optimier would not be as efficient.
65	*
66	* The principle is that we have a small buffer, called the uip_buf,
67	* in which the device driver puts an incoming packet. The TCP/IP
68	* stack parses the headers in the packet, and calls the
69	* application. If the remote host has sent data to the application,
70	* this data is present in the uip_buf and the application read the
71	* data from there. It is up to the application to put this data into
72	* a byte stream if needed. The application will not be fed with data
73	* that is out of sequence.
74	*
75	* If the application whishes to send data to the peer, it should put
76	* its data into the uip_buf. The uip_appdata pointer points to the
77	* first available byte. The TCP/IP stack will calculate the
78	* checksums, and fill in the necessary header fields and finally send
79	* the packet back to the peer.
80	*/
81	#include "uip.h"
82	#include "uipopt.h"
83	#include "uip_arch.h"
84	#include "uip_arp.h"
85	#include "FreeRTOS.h"
86
87	#if UIP_CONF_IPV6
88	#include "uip-neighbor.h"
89	#endif /* UIP_CONF_IPV6 */
90
91	#include <string.h>
92
93	/---------------------------------------------------------------------------/
94
95	/* Variable definitions. */
96
97	/* The IP address of this host. If it is defined to be fixed (by
98	setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set
99	here. Otherwise, the address */
100	#if UIP_FIXEDADDR > 0
101	const uip_ipaddr_t uip_hostaddr = { HTONS( (UIP_IPADDR0 << 8) \| UIP_IPADDR1 ), HTONS( (UIP_IPADDR2 << 8) \| UIP_IPADDR3 ) };
102	const uip_ipaddr_t uip_draddr = { HTONS( (UIP_DRIPADDR0 << 8) \| UIP_DRIPADDR1 ), HTONS( (UIP_DRIPADDR2 << 8) \| UIP_DRIPADDR3 ) };
103	const uip_ipaddr_t uip_netmask = { HTONS( (UIP_NETMASK0 << 8) \| UIP_NETMASK1 ), HTONS( (UIP_NETMASK2 << 8) \| UIP_NETMASK3 ) };
104	#else
105	uip_ipaddr_t uip_hostaddr, uip_draddr, uip_netmask;
106	#endif /* UIP_FIXEDADDR */
107
108	static const uip_ipaddr_t all_ones_addr =
109	#if UIP_CONF_IPV6
110	{ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff };
111	#else /* UIP_CONF_IPV6 */
112	{
113	0xffff, 0xffff
114	};
115	#endif /* UIP_CONF_IPV6 */
116	static const uip_ipaddr_t all_zeroes_addr =
117	#if UIP_CONF_IPV6
118	{ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 };
119	#else /* UIP_CONF_IPV6 */
120	{
121	0x0000, 0x0000
122	};
123	#endif /* UIP_CONF_IPV6 */
124
125	#if UIP_FIXEDETHADDR
126	const struct uip_eth_addr uip_ethaddr = { { UIP_ETHADDR0, UIP_ETHADDR1, UIP_ETHADDR2, UIP_ETHADDR3, UIP_ETHADDR4, UIP_ETHADDR5 } };
127	#else
128	struct uip_eth_addr uip_ethaddr = { { 0, 0, 0, 0, 0, 0 } };
129	#endif
130	#ifndef UIP_CONF_EXTERNAL_BUFFER
131	#ifdef __ICCARM__
132	#pragma data_alignment = 4
133	u8_t uip_buf[UIP_BUFSIZE + 2]; /* The packet buffer that contains incoming packets. */
134	#else
135	u8_t uip_buf[UIP_BUFSIZE + 2] ALIGN_STRUCT_END; /* The packet buffer that contains incoming packets. */
136	#endif
137	#endif /* UIP_CONF_EXTERNAL_BUFFER */
138
139	void uip_appdata; / The uip_appdata pointer points to
140	application data. */
141	void uip_sappdata; / The uip_appdata pointer points to
142	the application data which is to
143	be sent. */
144	#if UIP_URGDATA > 0
145	void uip_urgdata; / The uip_urgdata pointer points to
146	urgent data (out-of-band data), if
147	present. */
148	u16_t uip_urglen, uip_surglen;
149	#endif /* UIP_URGDATA > 0 */
150
151	u16_t uip_len, uip_slen;
152
153	/* The uip_len is either 8 or 16 bits,
154	depending on the maximum packet
155	size. */
156	u8_t uip_flags; /* The uip_flags variable is used for
157	communication between the TCP/IP stack
158	and the application program. */
159	struct uip_conn uip_conn; / uip_conn always points to the current
160	connection. */
161
162	struct uip_conn uip_conns[UIP_CONNS];
163
164	/* The uip_conns array holds all TCP
165	connections. */
166	u16_t uip_listenports[UIP_LISTENPORTS];
167
168	/* The uip_listenports list all currently
169	listning ports. */
170	#if UIP_UDP
171	struct uip_udp_conn *uip_udp_conn;
172	struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
173	#endif /* UIP_UDP */
174
175	static u16_t ipid; /* Ths ipid variable is an increasing
176	number that is used for the IP ID
177	field. */
178
179	void uip_setipid( u16_t id )
180	{
181	ipid = id;
182	}
183
184	static u8_t iss[4]; /* The iss variable is used for the TCP
185	initial sequence number. */
186
187	#if UIP_ACTIVE_OPEN
188	static u16_t lastport; /* Keeps track of the last port used for
189	a new connection. */
190	#endif /* UIP_ACTIVE_OPEN */
191
192	/* Temporary variables. */
193	u8_t uip_acc32[4];
194	static u8_t c, opt;
195	static u16_t tmp16;
196
197	/* Structures and definitions. */
198	#define TCP_FIN 0x01
199	#define TCP_SYN 0x02
200	#define TCP_RST 0x04
201	#define TCP_PSH 0x08
202	#define TCP_ACK 0x10
203	#define TCP_URG 0x20
204	#define TCP_CTL 0x3f
205
206	#define TCP_OPT_END 0 /* End of TCP options list */
207	#define TCP_OPT_NOOP 1 /* "No-operation" TCP option */
208	#define TCP_OPT_MSS 2 /* Maximum segment size TCP option */
209
210	#define TCP_OPT_MSS_LEN 4 /* Length of TCP MSS option. */
211
212	#define ICMP_ECHO_REPLY 0
213	#define ICMP_ECHO 8
214
215	#define ICMP6_ECHO_REPLY 129
216	#define ICMP6_ECHO 128
217	#define ICMP6_NEIGHBOR_SOLICITATION 135
218	#define ICMP6_NEIGHBOR_ADVERTISEMENT 136
219
220	#define ICMP6_FLAG_S ( 1 << 6 )
221	#define ICMP6_OPTION_SOURCE_LINK_ADDRESS 1
222	#define ICMP6_OPTION_TARGET_LINK_ADDRESS 2
223
224	/* Macros. */
225	#define BUF ( ( struct uip_tcpip_hdr * ) &uip_buf[UIP_LLH_LEN] )
226	#define FBUF ( ( struct uip_tcpip_hdr * ) &uip_reassbuf[0] )
227	#define ICMPBUF ( ( struct uip_icmpip_hdr * ) &uip_buf[UIP_LLH_LEN] )
228	#define UDPBUF ( ( struct uip_udpip_hdr * ) &uip_buf[UIP_LLH_LEN] )
229	#if UIP_STATISTICS == 1
230	struct uip_stats uip_stat;
231	#define UIP_STAT( s ) s
232	#else
233	#define UIP_STAT( s )
234	#endif /* UIP_STATISTICS == 1 */
235
236	#if UIP_LOGGING == 1
237	#include <stdio.h>
238	void uip_log( char *msg );
239	#define UIP_LOG( m ) uip_log( m )
240	#else
241	#define UIP_LOG( m )
242	#endif /* UIP_LOGGING == 1 */
243
244	#if !UIP_ARCH_ADD32
245	void uip_add32( u8_t *op32, u16_t op16 )
246	{
247	uip_acc32[3] = op32[3] + ( op16 & 0xff );
248	uip_acc32[2] = op32[2] + ( op16 >> 8 );
249	uip_acc32[1] = op32[1];
250	uip_acc32[0] = op32[0];
251
252	if( uip_acc32[2] < (op16 >> 8) )
253	{
254	++uip_acc32[1];
255	if( uip_acc32[1] == 0 )
256	{
257	++uip_acc32[0];
258	}
259	}
260
261	if( uip_acc32[3] < (op16 & 0xff) )
262	{
263	++uip_acc32[2];
264	if( uip_acc32[2] == 0 )
265	{
266	++uip_acc32[1];
267	if( uip_acc32[1] == 0 )
268	{
269	++uip_acc32[0];
270	}
271	}
272	}
273	}
274
275	#endif /* UIP_ARCH_ADD32 */
276
277	#if !UIP_ARCH_CHKSUM
278
279	/---------------------------------------------------------------------------/
280	static u16_t chksum( u16_t sum, const u8_t *data, u16_t len )
281	{
282	u16_t t;
283	const u8_t *dataptr;
284	const u8_t *last_byte;
285
286	dataptr = data;
287	last_byte = data + len - 1;
288
289	while( dataptr < last_byte )
290	{ /* At least two more bytes */
291	t = ( dataptr[0] << 8 ) + dataptr[1];
292	sum += t;
293	if( sum < t )
294	{
295	sum++; /* carry */
296	}
297
298	dataptr += 2;
299	}
300
301	if( dataptr == last_byte )
302	{
303	t = ( dataptr[0] << 8 ) + 0;
304	sum += t;
305	if( sum < t )
306	{
307	sum++; /* carry */
308	}
309	}
310
311	/* Return sum in host byte order. */
312	return sum;
313	}
314
315	/---------------------------------------------------------------------------/
316	u16_t uip_chksum( u16_t *data, u16_t len )
317	{
318	return htons( chksum(0, ( u8_t * ) data, len) );
319	}
320
321	/---------------------------------------------------------------------------/
322	#ifndef UIP_ARCH_IPCHKSUM
323	u16_t uip_ipchksum( void )
324	{
325	u16_t sum;
326
327	sum = chksum( 0, &uip_buf[UIP_LLH_LEN], UIP_IPH_LEN );
328	DEBUG_PRINTF( "uip_ipchksum: sum 0x%04x\n", sum );
329	return( sum == 0 ) ? 0xffff : htons( sum );
330	}
331
332	#endif
333
334	/---------------------------------------------------------------------------/
335	static u16_t upper_layer_chksum( u8_t proto )
336	{
337	u16_t upper_layer_len;
338	u16_t sum;
339
340	#if UIP_CONF_IPV6
341	upper_layer_len = ( ((u16_t) (BUF->len[0]) << 8) + BUF->len[1] );
342	#else /* UIP_CONF_IPV6 */
343	upper_layer_len = ( ((u16_t) (BUF->len[0]) << 8) + BUF->len[1] ) - UIP_IPH_LEN;
344	#endif /* UIP_CONF_IPV6 */
345
346	/* First sum pseudoheader. */
347
348	/* IP protocol and length fields. This addition cannot carry. */
349	sum = upper_layer_len + proto;
350
351	/* Sum IP source and destination addresses. */
352	sum = chksum( sum, ( u8_t * ) &BUF->srcipaddr[0], 2 * sizeof(uip_ipaddr_t) );
353
354	/* Sum TCP header and data. */
355	sum = chksum( sum, &uip_buf[UIP_IPH_LEN + UIP_LLH_LEN], upper_layer_len );
356
357	return( sum == 0 ) ? 0xffff : htons( sum );
358	}
359
360	/---------------------------------------------------------------------------/
361	#if UIP_CONF_IPV6
362	u16_t uip_icmp6chksum( void )
363	{
364	return upper_layer_chksum( UIP_PROTO_ICMP6 );
365	}
366
367	#endif /* UIP_CONF_IPV6 */
368
369	/---------------------------------------------------------------------------/
370	u16_t uip_tcpchksum( void )
371	{
372	return upper_layer_chksum( UIP_PROTO_TCP );
373	}
374
375	/---------------------------------------------------------------------------/
376	#if UIP_UDP_CHECKSUMS
377	u16_t uip_udpchksum( void )
378	{
379	return upper_layer_chksum( UIP_PROTO_UDP );
380	}
381
382	#endif /* UIP_UDP_CHECKSUMS */
383	#endif /* UIP_ARCH_CHKSUM */
384
385	/---------------------------------------------------------------------------/
386	void uip_init( void )
387	{
388	for( c = 0; c < UIP_LISTENPORTS; ++c )
389	{
390	uip_listenports[c] = 0;
391	}
392
393	for( c = 0; c < UIP_CONNS; ++c )
394	{
395	uip_conns[c].tcpstateflags = UIP_CLOSED;
396	}
397
398	#if UIP_ACTIVE_OPEN
399	lastport = 1024;
400	#endif /* UIP_ACTIVE_OPEN */
401
402	#if UIP_UDP
403	for( c = 0; c < UIP_UDP_CONNS; ++c )
404	{
405	uip_udp_conns[c].lport = 0;
406	}
407
408	#endif /* UIP_UDP */
409
410	/* IPv4 initialization. */
411	#if UIP_FIXEDADDR == 0
412
413	/* uip_hostaddr[0] = uip_hostaddr[1] = 0;*/
414	#endif /* UIP_FIXEDADDR */
415	}
416
417	/---------------------------------------------------------------------------/
418	#if UIP_ACTIVE_OPEN
419	struct uip_conn uip_connect( uip_ipaddr_t ripaddr, u16_t rport )
420	{
421	register struct uip_conn conn, cconn;
422
423	/* Find an unused local port. */
424	again:
425	++lastport;
426
427	if( lastport >= 32000 )
428	{
429	lastport = 4096;
430	}
431
432	/* Check if this port is already in use, and if so try to find
433	another one. */
434	for( c = 0; c < UIP_CONNS; ++c )
435	{
436	conn = &uip_conns[c];
437	if( conn->tcpstateflags != UIP_CLOSED && conn->lport == htons(lastport) )
438	{
439	goto again;
440	}
441	}
442
443	conn = 0;
444	for( c = 0; c < UIP_CONNS; ++c )
445	{
446	cconn = &uip_conns[c];
447	if( cconn->tcpstateflags == UIP_CLOSED )
448	{
449	conn = cconn;
450	break;
451	}
452
453	if( cconn->tcpstateflags == UIP_TIME_WAIT )
454	{
455	if( conn == 0 \|\| cconn->timer > conn->timer )
456	{
457	conn = cconn;
458	}
459	}
460	}
461
462	if( conn == 0 )
463	{
464	return 0;
465	}
466
467	conn->tcpstateflags = UIP_SYN_SENT;
468
469	conn->snd_nxt[0] = iss[0];
470	conn->snd_nxt[1] = iss[1];
471	conn->snd_nxt[2] = iss[2];
472	conn->snd_nxt[3] = iss[3];
473
474	conn->initialmss = conn->mss = UIP_TCP_MSS;
475
476	conn->len = 1; /* TCP length of the SYN is one. */
477	conn->nrtx = 0;
478	conn->timer = 1; /* Send the SYN next time around. */
479	conn->rto = UIP_RTO;
480	conn->sa = 0;
481	conn->sv = 16; /* Initial value of the RTT variance. */
482	conn->lport = htons( lastport );
483	conn->rport = rport;
484	uip_ipaddr_copy( &conn->ripaddr, ripaddr );
485
486	return conn;
487	}
488
489	#endif /* UIP_ACTIVE_OPEN */
490
491	/---------------------------------------------------------------------------/
492	#if UIP_UDP
493	struct uip_udp_conn uip_udp_new( uip_ipaddr_t ripaddr, u16_t rport )
494	{
495	register struct uip_udp_conn *conn;
496
497	/* Find an unused local port. */
498	again:
499	++lastport;
500
501	if( lastport >= 32000 )
502	{
503	lastport = 4096;
504	}
505
506	for( c = 0; c < UIP_UDP_CONNS; ++c )
507	{
508	if( uip_udp_conns[c].lport == htons(lastport) )
509	{
510	goto again;
511	}
512	}
513
514	conn = 0;
515	for( c = 0; c < UIP_UDP_CONNS; ++c )
516	{
517	if( uip_udp_conns[c].lport == 0 )
518	{
519	conn = &uip_udp_conns[c];
520	break;
521	}
522	}
523
524	if( conn == 0 )
525	{
526	return 0;
527	}
528
529	conn->lport = HTONS( lastport );
530	conn->rport = rport;
531	if( ripaddr == NULL )
532	{
533	memset( conn->ripaddr, 0, sizeof(uip_ipaddr_t) );
534	}
535	else
536	{
537	uip_ipaddr_copy( &conn->ripaddr, ripaddr );
538	}
539
540	conn->ttl = UIP_TTL;
541
542	return conn;
543	}
544
545	#endif /* UIP_UDP */
546
547	/---------------------------------------------------------------------------/
548	void uip_unlisten( u16_t port )
549	{
550	for( c = 0; c < UIP_LISTENPORTS; ++c )
551	{
552	if( uip_listenports[c] == port )
553	{
554	uip_listenports[c] = 0;
555	return;
556	}
557	}
558	}
559
560	/---------------------------------------------------------------------------/
561	void uip_listen( u16_t port )
562	{
563	for( c = 0; c < UIP_LISTENPORTS; ++c )
564	{
565	if( uip_listenports[c] == 0 )
566	{
567	uip_listenports[c] = port;
568	return;
569	}
570	}
571	}
572
573	/---------------------------------------------------------------------------/
574
575	/* XXX: IP fragment reassembly: not well-tested. */
576	#if UIP_REASSEMBLY && !UIP_CONF_IPV6
577	#define UIP_REASS_BUFSIZE ( UIP_BUFSIZE - UIP_LLH_LEN )
578	static u8_t uip_reassbuf[UIP_REASS_BUFSIZE];
579	static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / ( 8 * 8 )];
580	static const u8_t bitmap_bits[8] = { 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01 };
581	static u16_t uip_reasslen;
582	static u8_t uip_reassflags;
583	#define UIP_REASS_FLAG_LASTFRAG 0x01
584	static u8_t uip_reasstmr;
585
586	#define IP_MF 0x20
587
588	static u8_t uip_reass( void )
589	{
590	u16_t offset, len;
591	u16_t i;
592
593	/* If ip_reasstmr is zero, no packet is present in the buffer, so we
594	write the IP header of the fragment into the reassembly
595	buffer. The timer is updated with the maximum age. */
596	if( uip_reasstmr == 0 )
597	{
598	memcpy( uip_reassbuf, &BUF->vhl, UIP_IPH_LEN );
599	uip_reasstmr = UIP_REASS_MAXAGE;
600	uip_reassflags = 0;
601
602	/* Clear the bitmap. */
603	memset( uip_reassbitmap, 0, sizeof(uip_reassbitmap) );
604	}
605
606	/* Check if the incoming fragment matches the one currently present
607	in the reasembly buffer. If so, we proceed with copying the
608	fragment into the buffer. */
609	if
610	(
611	BUF->srcipaddr[0] == FBUF->srcipaddr[0] &&
612	BUF->srcipaddr[1] == FBUF->srcipaddr[1] &&
613	BUF->destipaddr[0] == FBUF->destipaddr[0] &&
614	BUF->destipaddr[1] == FBUF->destipaddr[1] &&
615	BUF->ipid[0] == FBUF->ipid[0] &&
616	BUF->ipid[1] == FBUF->ipid[1]
617	)
618	{
619	len = ( BUF->len[0] << 8 ) + BUF->len[1] - ( BUF->vhl & 0x0f ) * 4;
620	offset = ( ((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1] ) * 8;
621
622	/* If the offset or the offset + fragment length overflows the
623	reassembly buffer, we discard the entire packet. */
624	if( offset > UIP_REASS_BUFSIZE \|\| offset + len > UIP_REASS_BUFSIZE )
625	{
626	uip_reasstmr = 0;
627	goto nullreturn;
628	}
629
630	/* Copy the fragment into the reassembly buffer, at the right
631	offset. */
632	memcpy( &uip_reassbuf[UIP_IPH_LEN + offset], ( char * ) BUF + ( int ) ((BUF->vhl & 0x0f) * 4), len );
633
634	/* Update the bitmap. */
635	if( offset / (8 * 8) == (offset + len) / (8 * 8) )
636	{
637	/* If the two endpoints are in the same byte, we only update
638	that byte. */
639	uip_reassbitmap[offset / ( 8 * 8 )] \|= bitmap_bits[( offset / 8 ) & 7] &~bitmap_bits[( (offset + len) / 8 ) & 7];
640	}
641	else
642	{
643	/* If the two endpoints are in different bytes, we update the
644	bytes in the endpoints and fill the stuff inbetween with
645	0xff. */
646	uip_reassbitmap[offset / ( 8 * 8 )] \|= bitmap_bits[( offset / 8 ) & 7];
647	for( i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i )
648	{
649	uip_reassbitmap[i] = 0xff;
650	}
651
652	uip_reassbitmap[( offset + len ) / ( 8 * 8 )] \|= ~bitmap_bits[( (offset + len) / 8 ) & 7];
653	}
654
655	/* If this fragment has the More Fragments flag set to zero, we
656	know that this is the last fragment, so we can calculate the
657	size of the entire packet. We also set the
658	IP_REASS_FLAG_LASTFRAG flag to indicate that we have received
659	the final fragment. */
660	if( (BUF->ipoffset[0] & IP_MF) == 0 )
661	{
662	uip_reassflags \|= UIP_REASS_FLAG_LASTFRAG;
663	uip_reasslen = offset + len;
664	}
665
666	/* Finally, we check if we have a full packet in the buffer. We do
667	this by checking if we have the last fragment and if all bits
668	in the bitmap are set. */
669	if( uip_reassflags & UIP_REASS_FLAG_LASTFRAG )
670	{
671	/* Check all bytes up to and including all but the last byte in
672	the bitmap. */
673	for( i = 0; i < uip_reasslen / (8 * 8) - 1; ++i )
674	{
675	if( uip_reassbitmap[i] != 0xff )
676	{
677	goto nullreturn;
678	}
679	}
680
681	/* Check the last byte in the bitmap. It should contain just the
682	right amount of bits. */
683	if( uip_reassbitmap[uip_reasslen / (8 * 8)] != (u8_t)~bitmap_bits[uip_reasslen / 8 & 7] )
684	{
685	goto nullreturn;
686	}
687
688	/* If we have come this far, we have a full packet in the
689	buffer, so we allocate a pbuf and copy the packet into it. We
690	also reset the timer. */
691	uip_reasstmr = 0;
692	memcpy( BUF, FBUF, uip_reasslen );
693
694	/* Pretend to be a "normal" (i.e., not fragmented) IP packet
695	from now on. */
696	BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
697	BUF->len[0] = uip_reasslen >> 8;
698	BUF->len[1] = uip_reasslen & 0xff;
699	BUF->ipchksum = 0;
700	BUF->ipchksum = ~( uip_ipchksum() );
701
702	return uip_reasslen;
703	}
704	}
705
706	nullreturn:
707	return 0;
708	}
709
710	#endif /* UIP_REASSEMBLY */
711
712	/---------------------------------------------------------------------------/
713	static void uip_add_rcv_nxt( u16_t n )
714	{
715	uip_add32( uip_conn->rcv_nxt, n );
716	uip_conn->rcv_nxt[0] = uip_acc32[0];
717	uip_conn->rcv_nxt[1] = uip_acc32[1];
718	uip_conn->rcv_nxt[2] = uip_acc32[2];
719	uip_conn->rcv_nxt[3] = uip_acc32[3];
720	}
721
722	/---------------------------------------------------------------------------/
723	void uip_process( u8_t flag )
724	{
725	register struct uip_conn *uip_connr = uip_conn;
726
727	#if UIP_UDP
728	if( flag == UIP_UDP_SEND_CONN )
729	{
730	goto udp_send;
731	}
732
733	#endif /* UIP_UDP */
734
735	uip_sappdata = uip_appdata = &uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN];
736
737	/* Check if we were invoked because of a poll request for a
738	particular connection. */
739	if( flag == UIP_POLL_REQUEST )
740	{
741	if( (uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED && !uip_outstanding(uip_connr) )
742	{
743	uip_flags = UIP_POLL;
744	UIP_APPCALL();
745	goto appsend;
746	}
747
748	goto drop;
749
750	/* Check if we were invoked because of the perodic timer fireing. */
751	}
752	else if( flag == UIP_TIMER )
753	{
754	#if UIP_REASSEMBLY
755	if( uip_reasstmr != 0 )
756	{
757	--uip_reasstmr;
758	}
759
760	#endif /* UIP_REASSEMBLY */
761
762	/* Increase the initial sequence number. */
763	if( ++iss[3] == 0 )
764	{
765	if( ++iss[2] == 0 )
766	{
767	if( ++iss[1] == 0 )
768	{
769	++iss[0];
770	}
771	}
772	}
773
774	/* Reset the length variables. */
775	uip_len = 0;
776	uip_slen = 0;
777
778	/* Check if the connection is in a state in which we simply wait
779	for the connection to time out. If so, we increase the
780	connection's timer and remove the connection if it times
781	out. */
782	if( uip_connr->tcpstateflags == UIP_TIME_WAIT \|\| uip_connr->tcpstateflags == UIP_FIN_WAIT_2 )
783	{
784	++( uip_connr->timer );
785	if( uip_connr->timer == UIP_TIME_WAIT_TIMEOUT )
786	{
787	uip_connr->tcpstateflags = UIP_CLOSED;
788	}
789	}
790	else if( uip_connr->tcpstateflags != UIP_CLOSED )
791	{
792	/* If the connection has outstanding data, we increase the
793	connection's timer and see if it has reached the RTO value
794	in which case we retransmit. */
795	if( uip_outstanding(uip_connr) )
796	{
797	uip_connr->timer = uip_connr->timer - 1;
798	if( uip_connr->timer == 0 )
799	{
800	if
801	(
802	uip_connr->nrtx == UIP_MAXRTX \|\|
803	(
804	(uip_connr->tcpstateflags == UIP_SYN_SENT \|\| uip_connr->tcpstateflags == UIP_SYN_RCVD) &&
805	uip_connr->nrtx == UIP_MAXSYNRTX
806	)
807	)
808	{
809	uip_connr->tcpstateflags = UIP_CLOSED;
810
811	/* We call UIP_APPCALL() with uip_flags set to
812	UIP_TIMEDOUT to inform the application that the
813	connection has timed out. */
814	uip_flags = UIP_TIMEDOUT;
815	UIP_APPCALL();
816
817	/* We also send a reset packet to the remote host. */
818	BUF->flags = TCP_RST \| TCP_ACK;
819	goto tcp_send_nodata;
820	}
821
822	/* Exponential backoff. */
823	uip_connr->timer = UIP_RTO << ( uip_connr->nrtx > 4 ? 4 : uip_connr->nrtx );
824	++( uip_connr->nrtx );
825
826	/* Ok, so we need to retransmit. We do this differently
827	depending on which state we are in. In ESTABLISHED, we
828	call upon the application so that it may prepare the
829	data for the retransmit. In SYN_RCVD, we resend the
830	SYNACK that we sent earlier and in LAST_ACK we have to
831	retransmit our FINACK. */
832	UIP_STAT( ++uip_stat.tcp.rexmit );
833	switch( uip_connr->tcpstateflags & UIP_TS_MASK )
834	{
835	case UIP_SYN_RCVD:
836	/* In the SYN_RCVD state, we should retransmit our
837	SYNACK. */
838	goto tcp_send_synack;
839
840	#if UIP_ACTIVE_OPEN
841
842	case UIP_SYN_SENT:
843	/* In the SYN_SENT state, we retransmit out SYN. */
844	BUF->flags = 0;
845	goto tcp_send_syn;
846	#endif /* UIP_ACTIVE_OPEN */
847
848	case UIP_ESTABLISHED:
849	/* In the ESTABLISHED state, we call upon the application
850	to do the actual retransmit after which we jump into
851	the code for sending out the packet (the apprexmit
852	label). */
853	uip_flags = UIP_REXMIT;
854	UIP_APPCALL();
855	goto apprexmit;
856
857	case UIP_FIN_WAIT_1:
858	case UIP_CLOSING:
859	case UIP_LAST_ACK:
860	/* In all these states we should retransmit a FINACK. */
861	goto tcp_send_finack;
862	}
863	}
864	}
865	else if( (uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED )
866	{
867	/* If there was no need for a retransmission, we poll the
868	application for new data. */
869	uip_flags = UIP_POLL;
870	UIP_APPCALL();
871	goto appsend;
872	}
873	}
874
875	goto drop;
876	}
877
878	#if UIP_UDP
879	if( flag == UIP_UDP_TIMER )
880	{
881	if( uip_udp_conn->lport != 0 )
882	{
883	uip_conn = NULL;
884	uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
885	uip_len = uip_slen = 0;
886	uip_flags = UIP_POLL;
887	UIP_UDP_APPCALL();
888	goto udp_send;
889	}
890	else
891	{
892	goto drop;
893	}
894	}
895
896	#endif
897
898	/* This is where the input processing starts. */
899	UIP_STAT( ++uip_stat.ip.recv );
900
901	/* Start of IP input header processing code. */
902	#if UIP_CONF_IPV6
903
904	/* Check validity of the IP header. */
905	if( (BUF->vtc & 0xf0) != 0x60 )
906	{ /* IP version and header length. */
907	UIP_STAT( ++uip_stat.ip.drop );
908	UIP_STAT( ++uip_stat.ip.vhlerr );
909	UIP_LOG( "ipv6: invalid version." );
910	goto drop;
911	}
912
913	#else /* UIP_CONF_IPV6 */
914
915	/* Check validity of the IP header. */
916	if( BUF->vhl != 0x45 )
917	{ /* IP version and header length. */
918	UIP_STAT( ++uip_stat.ip.drop );
919	UIP_STAT( ++uip_stat.ip.vhlerr );
920	UIP_LOG( "ip: invalid version or header length." );
921	goto drop;
922	}
923
924	#endif /* UIP_CONF_IPV6 */
925
926	/* Check the size of the packet. If the size reported to us in
927	uip_len is smaller the size reported in the IP header, we assume
928	that the packet has been corrupted in transit. If the size of
929	uip_len is larger than the size reported in the IP packet header,
930	the packet has been padded and we set uip_len to the correct
931	value.. */
932	if( (BUF->len[0] << 8) + BUF->len[1] <= uip_len )
933	{
934	uip_len = ( BUF->len[0] << 8 ) + BUF->len[1];
935	#if UIP_CONF_IPV6
936	uip_len += 40; /* The length reported in the IPv6 header is the
937	length of the payload that follows the
938	header. However, uIP uses the uip_len variable
939	for holding the size of the entire packet,
940	including the IP header. For IPv4 this is not a
941	problem as the length field in the IPv4 header
942	contains the length of the entire packet. But
943	for IPv6 we need to add the size of the IPv6
944	header (40 bytes). */
945	#endif /* UIP_CONF_IPV6 */
946	}
947	else
948	{
949	UIP_LOG( "ip: packet shorter than reported in IP header." );
950	goto drop;
951	}
952
953	#if !UIP_CONF_IPV6
954
955	/* Check the fragment flag. */
956	if( (BUF->ipoffset[0] & 0x3f) != 0 \|\| BUF->ipoffset[1] != 0 )
957	{
958	#if UIP_REASSEMBLY
959	uip_len = uip_reass();
960	if( uip_len == 0 )
961	{
962	goto drop;
963	}
964
965	#else /* UIP_REASSEMBLY */
966	UIP_STAT( ++uip_stat.ip.drop );
967	UIP_STAT( ++uip_stat.ip.fragerr );
968	UIP_LOG( "ip: fragment dropped." );
969	goto drop;
970	#endif /* UIP_REASSEMBLY */
971	}
972
973	#endif /* UIP_CONF_IPV6 */
974
975	if( uip_ipaddr_cmp(uip_hostaddr, all_zeroes_addr) )
976	{
977	/* If we are configured to use ping IP address configuration and
978	hasn't been assigned an IP address yet, we accept all ICMP
979	packets. */
980	#if UIP_PINGADDRCONF && !UIP_CONF_IPV6
981	if( BUF->proto == UIP_PROTO_ICMP )
982	{
983	UIP_LOG( "ip: possible ping config packet received." );
984	goto icmp_input;
985	}
986	else
987	{
988	UIP_LOG( "ip: packet dropped since no address assigned." );
989	goto drop;
990	}
991
992	#endif /* UIP_PINGADDRCONF */
993	}
994	else
995	{
996	/* If IP broadcast support is configured, we check for a broadcast
997	UDP packet, which may be destined to us. */
998	#if UIP_BROADCAST
999	DEBUG_PRINTF( "UDP IP checksum 0x%04x\n", uip_ipchksum() );
1000	if( BUF->proto == UIP_PROTO_UDP && uip_ipaddr_cmp(BUF->destipaddr, all_ones_addr) /*&&
1001	uip_ipchksum() == 0xffff*/ )
1002	{
1003	goto udp_input;
1004	}
1005
1006	#endif /* UIP_BROADCAST */
1007
1008	/* Check if the packet is destined for our IP address. */
1009	#if !UIP_CONF_IPV6
1010	if( !uip_ipaddr_cmp(BUF->destipaddr, uip_hostaddr) )
1011	{
1012	UIP_STAT( ++uip_stat.ip.drop );
1013	goto drop;
1014	}
1015
1016	#else /* UIP_CONF_IPV6 */
1017
1018	/* For IPv6, packet reception is a little trickier as we need to
1019	make sure that we listen to certain multicast addresses (all
1020	hosts multicast address, and the solicited-node multicast
1021	address) as well. However, we will cheat here and accept all
1022	multicast packets that are sent to the ff02::/16 addresses. */
1023	if( !uip_ipaddr_cmp(BUF->destipaddr, uip_hostaddr) && BUF->destipaddr[0] != HTONS(0xff02) )
1024	{
1025	UIP_STAT( ++uip_stat.ip.drop );
1026	goto drop;
1027	}
1028
1029	#endif /* UIP_CONF_IPV6 */
1030	}
1031
1032	#if !UIP_CONF_IPV6
1033	if( uip_ipchksum() != 0xffff )
1034	{ /* Compute and check the IP header
1035	checksum. */
1036	UIP_STAT( ++uip_stat.ip.drop );
1037	UIP_STAT( ++uip_stat.ip.chkerr );
1038	UIP_LOG( "ip: bad checksum." );
1039	goto drop;
1040	}
1041
1042	#endif /* UIP_CONF_IPV6 */
1043
1044	if( BUF->proto == UIP_PROTO_TCP )
1045	{ /* Check for TCP packet. If so,
1046	proceed with TCP input
1047	processing. */
1048	goto tcp_input;
1049	}
1050
1051	#if UIP_UDP
1052	if( BUF->proto == UIP_PROTO_UDP )
1053	{
1054	goto udp_input;
1055	}
1056
1057	#endif /* UIP_UDP */
1058
1059	#if !UIP_CONF_IPV6
1060
1061	/* ICMPv4 processing code follows. */
1062	if( BUF->proto != UIP_PROTO_ICMP )
1063	{ /* We only allow ICMP packets from
1064	here. */
1065	UIP_STAT( ++uip_stat.ip.drop );
1066	UIP_STAT( ++uip_stat.ip.protoerr );
1067	UIP_LOG( "ip: neither tcp nor icmp." );
1068	goto drop;
1069	}
1070
1071	#if UIP_PINGADDRCONF
1072	icmp_input :
1073	#endif /* UIP_PINGADDRCONF */
1074	UIP_STAT( ++uip_stat.icmp.recv );
1075
1076	/* ICMP echo (i.e., ping) processing. This is simple, we only change
1077	the ICMP type from ECHO to ECHO_REPLY and adjust the ICMP
1078	checksum before we return the packet. */
1079	if( ICMPBUF->type != ICMP_ECHO )
1080	{
1081	UIP_STAT( ++uip_stat.icmp.drop );
1082	UIP_STAT( ++uip_stat.icmp.typeerr );
1083	UIP_LOG( "icmp: not icmp echo." );
1084	goto drop;
1085	}
1086
1087	/* If we are configured to use ping IP address assignment, we use
1088	the destination IP address of this ping packet and assign it to
1089	ourself. */
1090	#if UIP_PINGADDRCONF
1091	if( (uip_hostaddr[0] \| uip_hostaddr[1]) == 0 )
1092	{
1093	uip_hostaddr[0] = BUF->destipaddr[0];
1094	uip_hostaddr[1] = BUF->destipaddr[1];
1095	}
1096
1097	#endif /* UIP_PINGADDRCONF */
1098
1099	ICMPBUF->type = ICMP_ECHO_REPLY;
1100
1101	if( ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8)) )
1102	{
1103	ICMPBUF->icmpchksum += HTONS( ICMP_ECHO << 8 ) + 1;
1104	}
1105	else
1106	{
1107	ICMPBUF->icmpchksum += HTONS( ICMP_ECHO << 8 );
1108	}
1109
1110	/* Swap IP addresses. */
1111	uip_ipaddr_copy( BUF->destipaddr, BUF->srcipaddr );
1112	uip_ipaddr_copy( BUF->srcipaddr, uip_hostaddr );
1113
1114	UIP_STAT( ++uip_stat.icmp.sent );
1115	goto send;
1116
1117	/* End of IPv4 input header processing code. */
1118	#else /* !UIP_CONF_IPV6 */
1119
1120	/* This is IPv6 ICMPv6 processing code. */
1121	DEBUG_PRINTF( "icmp6_input: length %d\n", uip_len );
1122
1123	if( BUF->proto != UIP_PROTO_ICMP6 )
1124	{ /* We only allow ICMPv6 packets from
1125	here. */
1126	UIP_STAT( ++uip_stat.ip.drop );
1127	UIP_STAT( ++uip_stat.ip.protoerr );
1128	UIP_LOG( "ip: neither tcp nor icmp6." );
1129	goto drop;
1130	}
1131
1132	UIP_STAT( ++uip_stat.icmp.recv );
1133
1134	/* If we get a neighbor solicitation for our address we should send
1135	a neighbor advertisement message back. */
1136	if( ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION )
1137	{
1138	if( uip_ipaddr_cmp(ICMPBUF->icmp6data, uip_hostaddr) )
1139	{
1140	if( ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS )
1141	{
1142	/* Save the sender's address in our neighbor list. */
1143	uip_neighbor_add( ICMPBUF->srcipaddr, &(ICMPBUF->options[2]) );
1144	}
1145
1146	/* We should now send a neighbor advertisement back to where the
1147	neighbor solicication came from. */
1148	ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT;
1149	ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */
1150
1151	ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0;
1152
1153	uip_ipaddr_copy( ICMPBUF->destipaddr, ICMPBUF->srcipaddr );
1154	uip_ipaddr_copy( ICMPBUF->srcipaddr, uip_hostaddr );
1155	ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;
1156	ICMPBUF->options[1] = 1; /* Options length, 1 = 8 bytes. */
1157	memcpy( &(ICMPBUF->options[2]), &uip_ethaddr, sizeof(uip_ethaddr) );
1158	ICMPBUF->icmpchksum = 0;
1159	ICMPBUF->icmpchksum = ~uip_icmp6chksum();
1160	goto send;
1161	}
1162
1163	goto drop;
1164	}
1165	else if( ICMPBUF->type == ICMP6_ECHO )
1166	{
1167	/* ICMP echo (i.e., ping) processing. This is simple, we only
1168	change the ICMP type from ECHO to ECHO_REPLY and update the
1169	ICMP checksum before we return the packet. */
1170	ICMPBUF->type = ICMP6_ECHO_REPLY;
1171
1172	uip_ipaddr_copy( BUF->destipaddr, BUF->srcipaddr );
1173	uip_ipaddr_copy( BUF->srcipaddr, uip_hostaddr );
1174	ICMPBUF->icmpchksum = 0;
1175	ICMPBUF->icmpchksum = ~uip_icmp6chksum();
1176
1177	UIP_STAT( ++uip_stat.icmp.sent );
1178	goto send;
1179	}
1180	else
1181	{
1182	DEBUG_PRINTF( "Unknown icmp6 message type %d\n", ICMPBUF->type );
1183	UIP_STAT( ++uip_stat.icmp.drop );
1184	UIP_STAT( ++uip_stat.icmp.typeerr );
1185	UIP_LOG( "icmp: unknown ICMP message." );
1186	goto drop;
1187	}
1188
1189	/* End of IPv6 ICMP processing. */
1190	#endif /* !UIP_CONF_IPV6 */
1191
1192	#if UIP_UDP
1193
1194	/* UDP input processing. */
1195	udp_input :
1196	/* UDP processing is really just a hack. We don't do anything to the
1197	UDP/IP headers, but let the UDP application do all the hard
1198	work. If the application sets uip_slen, it has a packet to
1199	send. */
1200	#if UIP_UDP_CHECKSUMS
1201	uip_len = uip_len - UIP_IPUDPH_LEN;
1202	uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
1203	if( UDPBUF->udpchksum != 0 && uip_udpchksum() != 0xffff )
1204	{
1205	UIP_STAT( ++uip_stat.udp.drop );
1206	UIP_STAT( ++uip_stat.udp.chkerr );
1207	UIP_LOG( "udp: bad checksum." );
1208	goto drop;
1209	}
1210
1211	#else /* UIP_UDP_CHECKSUMS */
1212	uip_len = uip_len - UIP_IPUDPH_LEN;
1213	#endif /* UIP_UDP_CHECKSUMS */
1214
1215	/* Demultiplex this UDP packet between the UDP "connections". */
1216	for( uip_udp_conn = &uip_udp_conns[0]; uip_udp_conn < &uip_udp_conns[UIP_UDP_CONNS]; ++uip_udp_conn )
1217	{
1218	/* If the local UDP port is non-zero, the connection is considered
1219	to be used. If so, the local port number is checked against the
1220	destination port number in the received packet. If the two port
1221	numbers match, the remote port number is checked if the
1222	connection is bound to a remote port. Finally, if the
1223	connection is bound to a remote IP address, the source IP
1224	address of the packet is checked. */
1225	if
1226	(
1227	uip_udp_conn->lport != 0 &&
1228	UDPBUF->destport == uip_udp_conn->lport &&
1229	(uip_udp_conn->rport == 0 \|\| UDPBUF->srcport == uip_udp_conn->rport) &&
1230	(
1231	uip_ipaddr_cmp(uip_udp_conn->ripaddr, all_zeroes_addr) \|\|
1232	uip_ipaddr_cmp(uip_udp_conn->ripaddr, all_ones_addr) \|\|
1233	uip_ipaddr_cmp(BUF->srcipaddr, uip_udp_conn->ripaddr)
1234	)
1235	)
1236	{
1237	goto udp_found;
1238	}
1239	}
1240
1241	UIP_LOG( "udp: no matching connection found" );
1242	goto drop;
1243
1244	udp_found:
1245	UIP_STAT( ++uip_stat.udp.recv );
1246	uip_conn = NULL;
1247	uip_flags = UIP_NEWDATA;
1248	uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
1249	uip_slen = 0;
1250	UIP_UDP_APPCALL();
1251	udp_send:
1252	if( uip_slen == 0 )
1253	{
1254	goto drop;
1255	}
1256
1257	uip_len = uip_slen + UIP_IPUDPH_LEN;
1258
1259	#if UIP_CONF_IPV6
1260
1261	/* For IPv6, the IP length field does not include the IPv6 IP header
1262	length. */
1263	BUF->len[0] = ( (uip_len - UIP_IPH_LEN) >> 8 );
1264	BUF->len[1] = ( (uip_len - UIP_IPH_LEN) & 0xff );
1265	#else /* UIP_CONF_IPV6 */
1266	BUF->len[0] = ( uip_len >> 8 );
1267	BUF->len[1] = ( uip_len & 0xff );
1268	#endif /* UIP_CONF_IPV6 */
1269
1270	BUF->ttl = uip_udp_conn->ttl;
1271	BUF->proto = UIP_PROTO_UDP;
1272
1273	UDPBUF->udplen = HTONS( uip_slen + UIP_UDPH_LEN );
1274	UDPBUF->udpchksum = 0;
1275
1276	BUF->srcport = uip_udp_conn->lport;
1277	BUF->destport = uip_udp_conn->rport;
1278
1279	uip_ipaddr_copy( BUF->srcipaddr, uip_hostaddr );
1280	uip_ipaddr_copy( BUF->destipaddr, uip_udp_conn->ripaddr );
1281
1282	uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPTCPH_LEN];
1283
1284	#if UIP_UDP_CHECKSUMS
1285
1286	/* Calculate UDP checksum. */
1287	UDPBUF->udpchksum = ~( uip_udpchksum() );
1288	if( UDPBUF->udpchksum == 0 )
1289	{
1290	UDPBUF->udpchksum = 0xffff;
1291	}
1292
1293	#endif /* UIP_UDP_CHECKSUMS */
1294	UIP_STAT( ++uip_stat.udp.sent );
1295	goto ip_send_nolen;
1296	#endif /* UIP_UDP */
1297
1298	/* TCP input processing. */
1299	tcp_input : UIP_STAT( ++uip_stat.tcp.recv );
1300
1301	/* Start of TCP input header processing code. */
1302	if( uip_tcpchksum() != 0xffff )
1303	{ /* Compute and check the TCP
1304	checksum. */
1305	UIP_STAT( ++uip_stat.tcp.drop );
1306	UIP_STAT( ++uip_stat.tcp.chkerr );
1307	UIP_LOG( "tcp: bad checksum." );
1308	goto drop;
1309	}
1310
1311	/* Demultiplex this segment. */
1312
1313	/* First check any active connections. */
1314	for( uip_connr = &uip_conns[0]; uip_connr <= &uip_conns[UIP_CONNS - 1]; ++uip_connr )
1315	{
1316	if
1317	(
1318	uip_connr->tcpstateflags != UIP_CLOSED &&
1319	BUF->destport == uip_connr->lport &&
1320	BUF->srcport == uip_connr->rport &&
1321	uip_ipaddr_cmp(BUF->srcipaddr, uip_connr->ripaddr)
1322	)
1323	{
1324	goto found;
1325	}
1326	}
1327
1328	/* If we didn't find and active connection that expected the packet,
1329	either this packet is an old duplicate, or this is a SYN packet
1330	destined for a connection in LISTEN. If the SYN flag isn't set,
1331	it is an old packet and we send a RST. */
1332	if( (BUF->flags & TCP_CTL) != TCP_SYN )
1333	{
1334	goto reset;
1335	}
1336
1337	tmp16 = BUF->destport;
1338
1339	/* Next, check listening connections. */
1340	for( c = 0; c < UIP_LISTENPORTS; ++c )
1341	{
1342	if( tmp16 == uip_listenports[c] )
1343	{
1344	goto found_listen;
1345	}
1346	}
1347
1348	/* No matching connection found, so we send a RST packet. */
1349	UIP_STAT( ++uip_stat.tcp.synrst );
1350	reset:
1351	/* We do not send resets in response to resets. */
1352	if( BUF->flags & TCP_RST )
1353	{
1354	goto drop;
1355	}
1356
1357	UIP_STAT( ++uip_stat.tcp.rst );
1358
1359	BUF->flags = TCP_RST \| TCP_ACK;
1360	uip_len = UIP_IPTCPH_LEN;
1361	BUF->tcpoffset = 5 << 4;
1362
1363	/* Flip the seqno and ackno fields in the TCP header. */
1364	c = BUF->seqno[3];
1365	BUF->seqno[3] = BUF->ackno[3];
1366	BUF->ackno[3] = c;
1367
1368	c = BUF->seqno[2];
1369	BUF->seqno[2] = BUF->ackno[2];
1370	BUF->ackno[2] = c;
1371
1372	c = BUF->seqno[1];
1373	BUF->seqno[1] = BUF->ackno[1];
1374	BUF->ackno[1] = c;
1375
1376	c = BUF->seqno[0];
1377	BUF->seqno[0] = BUF->ackno[0];
1378	BUF->ackno[0] = c;
1379
1380	/* We also have to increase the sequence number we are
1381	acknowledging. If the least significant byte overflowed, we need
1382	to propagate the carry to the other bytes as well. */
1383	if( ++BUF->ackno[3] == 0 )
1384	{
1385	if( ++BUF->ackno[2] == 0 )
1386	{
1387	if( ++BUF->ackno[1] == 0 )
1388	{
1389	++BUF->ackno[0];
1390	}
1391	}
1392	}
1393
1394	/* Swap port numbers. */
1395	tmp16 = BUF->srcport;
1396	BUF->srcport = BUF->destport;
1397	BUF->destport = tmp16;
1398
1399	/* Swap IP addresses. */
1400	uip_ipaddr_copy( BUF->destipaddr, BUF->srcipaddr );
1401	uip_ipaddr_copy( BUF->srcipaddr, uip_hostaddr );
1402
1403	/* And send out the RST packet! */
1404	goto tcp_send_noconn;
1405
1406	/* This label will be jumped to if we matched the incoming packet
1407	with a connection in LISTEN. In that case, we should create a new
1408	connection and send a SYNACK in return. */
1409	found_listen:
1410	/* First we check if there are any connections avaliable. Unused
1411	connections are kept in the same table as used connections, but
1412	unused ones have the tcpstate set to CLOSED. Also, connections in
1413	TIME_WAIT are kept track of and we'll use the oldest one if no
1414	CLOSED connections are found. Thanks to Eddie C. Dost for a very
1415	nice algorithm for the TIME_WAIT search. */
1416	uip_connr = 0;
1417	for( c = 0; c < UIP_CONNS; ++c )
1418	{
1419	if( uip_conns[c].tcpstateflags == UIP_CLOSED )
1420	{
1421	uip_connr = &uip_conns[c];
1422	break;
1423	}
1424
1425	if( uip_conns[c].tcpstateflags == UIP_TIME_WAIT )
1426	{
1427	if( uip_connr == 0 \|\| uip_conns[c].timer > uip_connr->timer )
1428	{
1429	uip_connr = &uip_conns[c];
1430	}
1431	}
1432	}
1433
1434	if( uip_connr == 0 )
1435	{
1436	/* All connections are used already, we drop packet and hope that
1437	the remote end will retransmit the packet at a time when we
1438	have more spare connections. */
1439	UIP_STAT( ++uip_stat.tcp.syndrop );
1440	UIP_LOG( "tcp: found no unused connections." );
1441	goto drop;
1442	}
1443
1444	uip_conn = uip_connr;
1445
1446	/* Fill in the necessary fields for the new connection. */
1447	uip_connr->rto = uip_connr->timer = UIP_RTO;
1448	uip_connr->sa = 0;
1449	uip_connr->sv = 4;
1450	uip_connr->nrtx = 0;
1451	uip_connr->lport = BUF->destport;
1452	uip_connr->rport = BUF->srcport;
1453	uip_ipaddr_copy( uip_connr->ripaddr, BUF->srcipaddr );
1454	uip_connr->tcpstateflags = UIP_SYN_RCVD;
1455
1456	uip_connr->snd_nxt[0] = iss[0];
1457	uip_connr->snd_nxt[1] = iss[1];
1458	uip_connr->snd_nxt[2] = iss[2];
1459	uip_connr->snd_nxt[3] = iss[3];
1460	uip_connr->len = 1;
1461
1462	/* rcv_nxt should be the seqno from the incoming packet + 1. */
1463	uip_connr->rcv_nxt[3] = BUF->seqno[3];
1464	uip_connr->rcv_nxt[2] = BUF->seqno[2];
1465	uip_connr->rcv_nxt[1] = BUF->seqno[1];
1466	uip_connr->rcv_nxt[0] = BUF->seqno[0];
1467	uip_add_rcv_nxt( 1 );
1468
1469	/* Parse the TCP MSS option, if present. */
1470	if( (BUF->tcpoffset & 0xf0) > 0x50 )
1471	{
1472	for( c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2; )
1473	{
1474	opt = uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + c];
1475	if( opt == TCP_OPT_END )
1476	{
1477	/* End of options. */
1478	break;
1479	}
1480	else if( opt == TCP_OPT_NOOP )
1481	{
1482	++c;
1483
1484	/* NOP option. */
1485	}
1486	else if( opt == TCP_OPT_MSS && uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN )
1487	{
1488	/* An MSS option with the right option length. */
1489	tmp16 = ( (u16_t) uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8 ) \| ( u16_t ) uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + 3 + c];
1490	uip_connr->initialmss = uip_connr->mss = tmp16 > UIP_TCP_MSS ? UIP_TCP_MSS : tmp16;
1491
1492	/* And we are done processing options. */
1493	break;
1494	}
1495	else
1496	{
1497	/* All other options have a length field, so that we easily
1498	can skip past them. */
1499	if( uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0 )
1500	{
1501	/* If the length field is zero, the options are malformed
1502	and we don't process them further. */
1503	break;
1504	}
1505
1506	c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
1507	}
1508	}
1509	}
1510
1511	/* Our response will be a SYNACK. */
1512	#if UIP_ACTIVE_OPEN
1513	tcp_send_synack : BUF->flags = TCP_ACK;
1514
1515	tcp_send_syn:
1516	BUF->flags \|= TCP_SYN;
1517	#else /* UIP_ACTIVE_OPEN */
1518	tcp_send_synack : BUF->flags = TCP_SYN \| TCP_ACK;
1519	#endif /* UIP_ACTIVE_OPEN */
1520
1521	/* We send out the TCP Maximum Segment Size option with our
1522	SYNACK. */
1523	BUF->optdata[0] = TCP_OPT_MSS;
1524	BUF->optdata[1] = TCP_OPT_MSS_LEN;
1525	BUF->optdata[2] = ( UIP_TCP_MSS ) / 256;
1526	BUF->optdata[3] = ( UIP_TCP_MSS ) & 255;
1527	uip_len = UIP_IPTCPH_LEN + TCP_OPT_MSS_LEN;
1528	BUF->tcpoffset = ( (UIP_TCPH_LEN + TCP_OPT_MSS_LEN) / 4 ) << 4;
1529	goto tcp_send;
1530
1531	/* This label will be jumped to if we found an active connection. */
1532	found:
1533	uip_conn = uip_connr;
1534	uip_flags = 0;
1535
1536	/* We do a very naive form of TCP reset processing; we just accept
1537	any RST and kill our connection. We should in fact check if the
1538	sequence number of this reset is wihtin our advertised window
1539	before we accept the reset. */
1540	if( BUF->flags & TCP_RST )
1541	{
1542	uip_connr->tcpstateflags = UIP_CLOSED;
1543	UIP_LOG( "tcp: got reset, aborting connection." );
1544	uip_flags = UIP_ABORT;
1545	UIP_APPCALL();
1546	goto drop;
1547	}
1548
1549	/* Calculated the length of the data, if the application has sent
1550	any data to us. */
1551	c = ( BUF->tcpoffset >> 4 ) << 2;
1552
1553	/* uip_len will contain the length of the actual TCP data. This is
1554	calculated by subtracing the length of the TCP header (in
1555	c) and the length of the IP header (20 bytes). */
1556	uip_len = uip_len - c - UIP_IPH_LEN;
1557
1558	/* First, check if the sequence number of the incoming packet is
1559	what we're expecting next. If not, we send out an ACK with the
1560	correct numbers in. */
1561	if( !(((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_SYN_SENT) && ((BUF->flags & TCP_CTL) == (TCP_SYN \| TCP_ACK))) )
1562	{
1563	if
1564	(
1565	(uip_len > 0 \|\| ((BUF->flags & (TCP_SYN \| TCP_FIN)) != 0)) &&
1566	(
1567	BUF->seqno[0] != uip_connr->rcv_nxt[0] \|\|
1568	BUF->seqno[1] != uip_connr->rcv_nxt[1] \|\|
1569	BUF->seqno[2] != uip_connr->rcv_nxt[2] \|\|
1570	BUF->seqno[3] != uip_connr->rcv_nxt[3]
1571	)
1572	)
1573	{
1574	goto tcp_send_ack;
1575	}
1576	}
1577
1578	/* Next, check if the incoming segment acknowledges any outstanding
1579	data. If so, we update the sequence number, reset the length of
1580	the outstanding data, calculate RTT estimations, and reset the
1581	retransmission timer. */
1582	if( (BUF->flags & TCP_ACK) && uip_outstanding(uip_connr) )
1583	{
1584	uip_add32( uip_connr->snd_nxt, uip_connr->len );
1585
1586	if
1587	(
1588	BUF->ackno[0] == uip_acc32[0] &&
1589	BUF->ackno[1] == uip_acc32[1] &&
1590	BUF->ackno[2] == uip_acc32[2] &&
1591	BUF->ackno[3] == uip_acc32[3]
1592	)
1593	{
1594	/* Update sequence number. */
1595	uip_connr->snd_nxt[0] = uip_acc32[0];
1596	uip_connr->snd_nxt[1] = uip_acc32[1];
1597	uip_connr->snd_nxt[2] = uip_acc32[2];
1598	uip_connr->snd_nxt[3] = uip_acc32[3];
1599
1600	/* Do RTT estimation, unless we have done retransmissions. */
1601	if( uip_connr->nrtx == 0 )
1602	{
1603	signed char m;
1604	m = uip_connr->rto - uip_connr->timer;
1605
1606	/* This is taken directly from VJs original code in his paper */
1607	m = m - ( uip_connr->sa >> 3 );
1608	uip_connr->sa += m;
1609	if( m < 0 )
1610	{
1611	m = -m;
1612	}
1613
1614	m = m - ( uip_connr->sv >> 2 );
1615	uip_connr->sv += m;
1616	uip_connr->rto = ( uip_connr->sa >> 3 ) + uip_connr->sv;
1617	}
1618
1619	/* Set the acknowledged flag. */
1620	uip_flags = UIP_ACKDATA;
1621
1622	/* Reset the retransmission timer. */
1623	uip_connr->timer = uip_connr->rto;
1624
1625	/* Reset length of outstanding data. */
1626	uip_connr->len = 0;
1627	}
1628	}
1629
1630	/* Do different things depending on in what state the connection is. */
1631	switch( uip_connr->tcpstateflags & UIP_TS_MASK )
1632	{
1633	/* CLOSED and LISTEN are not handled here. CLOSE_WAIT is not
1634	implemented, since we force the application to close when the
1635	peer sends a FIN (hence the application goes directly from
1636	ESTABLISHED to LAST_ACK). */
1637	case UIP_SYN_RCVD:
1638	/* In SYN_RCVD we have sent out a SYNACK in response to a SYN, and
1639	we are waiting for an ACK that acknowledges the data we sent
1640	out the last time. Therefore, we want to have the UIP_ACKDATA
1641	flag set. If so, we enter the ESTABLISHED state. */
1642	if( uip_flags & UIP_ACKDATA )
1643	{
1644	uip_connr->tcpstateflags = UIP_ESTABLISHED;
1645	uip_flags = UIP_CONNECTED;
1646	uip_connr->len = 0;
1647	if( uip_len > 0 )
1648	{
1649	uip_flags \|= UIP_NEWDATA;
1650	uip_add_rcv_nxt( uip_len );
1651	}
1652
1653	uip_slen = 0;
1654	UIP_APPCALL();
1655	goto appsend;
1656	}
1657
1658	goto drop;
1659	#if UIP_ACTIVE_OPEN
1660
1661	case UIP_SYN_SENT:
1662	/* In SYN_SENT, we wait for a SYNACK that is sent in response to
1663	our SYN. The rcv_nxt is set to sequence number in the SYNACK
1664	plus one, and we send an ACK. We move into the ESTABLISHED
1665	state. */
1666	if( (uip_flags & UIP_ACKDATA) && (BUF->flags & TCP_CTL) == (TCP_SYN \| TCP_ACK) )
1667	{
1668	/* Parse the TCP MSS option, if present. */
1669	if( (BUF->tcpoffset & 0xf0) > 0x50 )
1670	{
1671	for( c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2; )
1672	{
1673	opt = uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + c];
1674	if( opt == TCP_OPT_END )
1675	{
1676	/* End of options. */
1677	break;
1678	}
1679	else if( opt == TCP_OPT_NOOP )
1680	{
1681	++c;
1682
1683	/* NOP option. */
1684	}
1685	else if( opt == TCP_OPT_MSS && uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN )
1686	{
1687	/* An MSS option with the right option length. */
1688	tmp16 = ( uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8 ) \| uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 3 + c];
1689	uip_connr->initialmss = uip_connr->mss = tmp16 > UIP_TCP_MSS ? UIP_TCP_MSS : tmp16;
1690
1691	/* And we are done processing options. */
1692	break;
1693	}
1694	else
1695	{
1696	/* All other options have a length field, so that we easily
1697	can skip past them. */
1698	if( uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0 )
1699	{
1700	/* If the length field is zero, the options are malformed
1701	and we don't process them further. */
1702	break;
1703	}
1704
1705	c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
1706	}
1707	}
1708	}
1709
1710	uip_connr->tcpstateflags = UIP_ESTABLISHED;
1711	uip_connr->rcv_nxt[0] = BUF->seqno[0];
1712	uip_connr->rcv_nxt[1] = BUF->seqno[1];
1713	uip_connr->rcv_nxt[2] = BUF->seqno[2];
1714	uip_connr->rcv_nxt[3] = BUF->seqno[3];
1715	uip_add_rcv_nxt( 1 );
1716	uip_flags = UIP_CONNECTED \| UIP_NEWDATA;
1717	uip_connr->len = 0;
1718	uip_len = 0;
1719	uip_slen = 0;
1720	UIP_APPCALL();
1721	goto appsend;
1722	}
1723
1724	/* Inform the application that the connection failed */
1725	uip_flags = UIP_ABORT;
1726	UIP_APPCALL();
1727
1728	/* The connection is closed after we send the RST */
1729	uip_conn->tcpstateflags = UIP_CLOSED;
1730	goto reset;
1731	#endif /* UIP_ACTIVE_OPEN */
1732
1733	case UIP_ESTABLISHED:
1734	/* In the ESTABLISHED state, we call upon the application to feed
1735	data into the uip_buf. If the UIP_ACKDATA flag is set, the
1736	application should put new data into the buffer, otherwise we are
1737	retransmitting an old segment, and the application should put that
1738	data into the buffer.
1739
1740	If the incoming packet is a FIN, we should close the connection on
1741	this side as well, and we send out a FIN and enter the LAST_ACK
1742	state. We require that there is no outstanding data; otherwise the
1743	sequence numbers will be screwed up. */
1744	if( BUF->flags & TCP_FIN && !(uip_connr->tcpstateflags & UIP_STOPPED) )
1745	{
1746	if( uip_outstanding(uip_connr) )
1747	{
1748	goto drop;
1749	}
1750
1751	uip_add_rcv_nxt( 1 + uip_len );
1752	uip_flags \|= UIP_CLOSE;
1753	if( uip_len > 0 )
1754	{
1755	uip_flags \|= UIP_NEWDATA;
1756	}
1757
1758	UIP_APPCALL();
1759	uip_connr->len = 1;
1760	uip_connr->tcpstateflags = UIP_LAST_ACK;
1761	uip_connr->nrtx = 0;
1762	tcp_send_finack:
1763	BUF->flags = TCP_FIN \| TCP_ACK;
1764	goto tcp_send_nodata;
1765	}
1766
1767	/* Check the URG flag. If this is set, the segment carries urgent
1768	data that we must pass to the application. */
1769	if( (BUF->flags & TCP_URG) != 0 )
1770	{
1771	#if UIP_URGDATA > 0
1772	uip_urglen = ( BUF->urgp[0] << 8 ) \| BUF->urgp[1];
1773	if( uip_urglen > uip_len )
1774	{
1775	/* There is more urgent data in the next segment to come. */
1776	uip_urglen = uip_len;
1777	}
1778
1779	uip_add_rcv_nxt( uip_urglen );
1780	uip_len -= uip_urglen;
1781	uip_urgdata = uip_appdata;
1782	uip_appdata += uip_urglen;
1783	}
1784	else
1785	{
1786	uip_urglen = 0;
1787	#else /* UIP_URGDATA > 0 */
1788	uip_appdata = ( ( char * ) uip_appdata ) + ( (BUF->urgp[0] << 8) \| BUF->urgp[1] );
1789	uip_len -= ( BUF->urgp[0] << 8 ) \| BUF->urgp[1];
1790	#endif /* UIP_URGDATA > 0 */
1791	}
1792
1793	/* If uip_len > 0 we have TCP data in the packet, and we flag this
1794	by setting the UIP_NEWDATA flag and update the sequence number
1795	we acknowledge. If the application has stopped the dataflow
1796	using uip_stop(), we must not accept any data packets from the
1797	remote host. */
1798	if( uip_len > 0 && !(uip_connr->tcpstateflags & UIP_STOPPED) )
1799	{
1800	uip_flags \|= UIP_NEWDATA;
1801	uip_add_rcv_nxt( uip_len );
1802	}
1803
1804	/* Check if the available buffer space advertised by the other end
1805	is smaller than the initial MSS for this connection. If so, we
1806	set the current MSS to the window size to ensure that the
1807	application does not send more data than the other end can
1808	handle.
1809
1810	If the remote host advertises a zero window, we set the MSS to
1811	the initial MSS so that the application will send an entire MSS
1812	of data. This data will not be acknowledged by the receiver,
1813	and the application will retransmit it. This is called the
1814	"persistent timer" and uses the retransmission mechanim.
1815	*/
1816	tmp16 = ( (u16_t) BUF->wnd[0] << 8 ) + ( u16_t ) BUF->wnd[1];
1817	if( tmp16 > (uip_connr->initialmss * FRAME_MULTIPLE) \|\| tmp16 == 0 )
1818	{
1819	tmp16 = uip_connr->initialmss * FRAME_MULTIPLE;
1820	}
1821
1822	uip_connr->mss = tmp16;
1823
1824	/* If this packet constitutes an ACK for outstanding data (flagged
1825	by the UIP_ACKDATA flag, we should call the application since it
1826	might want to send more data. If the incoming packet had data
1827	from the peer (as flagged by the UIP_NEWDATA flag), the
1828	application must also be notified.
1829
1830	When the application is called, the global variable uip_len
1831	contains the length of the incoming data. The application can
1832	access the incoming data through the global pointer
1833	uip_appdata, which usually points UIP_IPTCPH_LEN + UIP_LLH_LEN
1834	bytes into the uip_buf array.
1835
1836	If the application wishes to send any data, this data should be
1837	put into the uip_appdata and the length of the data should be
1838	put into uip_len. If the application don't have any data to
1839	send, uip_len must be set to 0. */
1840	if( uip_flags & (UIP_NEWDATA \| UIP_ACKDATA) )
1841	{
1842	uip_slen = 0;
1843	UIP_APPCALL();
1844
1845	appsend:
1846	if( uip_flags & UIP_ABORT )
1847	{
1848	uip_slen = 0;
1849	uip_connr->tcpstateflags = UIP_CLOSED;
1850	BUF->flags = TCP_RST \| TCP_ACK;
1851	goto tcp_send_nodata;
1852	}
1853
1854	if( uip_flags & UIP_CLOSE )
1855	{
1856	uip_slen = 0;
1857	uip_connr->len = 1;
1858	uip_connr->tcpstateflags = UIP_FIN_WAIT_1;
1859	uip_connr->nrtx = 0;
1860	BUF->flags = TCP_FIN \| TCP_ACK;
1861	goto tcp_send_nodata;
1862	}
1863
1864	/* If uip_slen > 0, the application has data to be sent. */
1865	if( uip_slen > 0 )
1866	{
1867	/* If the connection has acknowledged data, the contents of
1868	the ->len variable should be discarded. */
1869	if( (uip_flags & UIP_ACKDATA) != 0 )
1870	{
1871	uip_connr->len = 0;
1872	}
1873
1874	/* If the ->len variable is non-zero the connection has
1875	already data in transit and cannot send anymore right
1876	now. */
1877	if( uip_connr->len == 0 )
1878	{
1879	/* The application cannot send more than what is allowed by
1880	the mss (the minumum of the MSS and the available
1881	window). */
1882	if( uip_slen > uip_connr->mss )
1883	{
1884	uip_slen = uip_connr->mss;
1885	}
1886
1887	/* Remember how much data we send out now so that we know
1888	when everything has been acknowledged. */
1889	uip_connr->len = uip_slen;
1890	}
1891	else
1892	{
1893	/* If the application already had unacknowledged data, we
1894	make sure that the application does not send (i.e.,
1895	retransmit) out more than it previously sent out. */
1896	uip_slen = uip_connr->len;
1897	}
1898	}
1899
1900	uip_connr->nrtx = 0;
1901	apprexmit:
1902	uip_appdata = uip_sappdata;
1903
1904	/* If the application has data to be sent, or if the incoming
1905	packet had new data in it, we must send out a packet. */
1906	if( uip_slen > 0 && uip_connr->len > 0 )
1907	{
1908	/* Add the length of the IP and TCP headers. */
1909	uip_len = uip_connr->len + UIP_TCPIP_HLEN;
1910
1911	/* We always set the ACK flag in response packets. */
1912	BUF->flags = TCP_ACK \| TCP_PSH;
1913
1914	/* Send the packet. */
1915	goto tcp_send_noopts;
1916	}
1917
1918	/* If there is no data to send, just send out a pure ACK if
1919	there is newdata. */
1920	if( uip_flags & UIP_NEWDATA )
1921	{
1922	uip_len = UIP_TCPIP_HLEN;
1923	BUF->flags = TCP_ACK;
1924	goto tcp_send_noopts;
1925	}
1926	}
1927
1928	goto drop;
1929
1930	case UIP_LAST_ACK:
1931	/* We can close this connection if the peer has acknowledged our
1932	FIN. This is indicated by the UIP_ACKDATA flag. */
1933	if( uip_flags & UIP_ACKDATA )
1934	{
1935	uip_connr->tcpstateflags = UIP_CLOSED;
1936	uip_flags = UIP_CLOSE;
1937	UIP_APPCALL();
1938	}
1939
1940	break;
1941
1942	case UIP_FIN_WAIT_1:
1943	/* The application has closed the connection, but the remote host
1944	hasn't closed its end yet. Thus we do nothing but wait for a
1945	FIN from the other side. */
1946	if( uip_len > 0 )
1947	{
1948	uip_add_rcv_nxt( uip_len );
1949	}
1950
1951	if( BUF->flags & TCP_FIN )
1952	{
1953	if( uip_flags & UIP_ACKDATA )
1954	{
1955	uip_connr->tcpstateflags = UIP_TIME_WAIT;
1956	uip_connr->timer = 0;
1957	uip_connr->len = 0;
1958	}
1959	else
1960	{
1961	uip_connr->tcpstateflags = UIP_CLOSING;
1962	}
1963
1964	uip_add_rcv_nxt( 1 );
1965	uip_flags = UIP_CLOSE;
1966	UIP_APPCALL();
1967	goto tcp_send_ack;
1968	}
1969	else if( uip_flags & UIP_ACKDATA )
1970	{
1971	uip_connr->tcpstateflags = UIP_FIN_WAIT_2;
1972	uip_connr->len = 0;
1973	goto drop;
1974	}
1975
1976	if( uip_len > 0 )
1977	{
1978	goto tcp_send_ack;
1979	}
1980
1981	goto drop;
1982
1983	case UIP_FIN_WAIT_2:
1984	if( uip_len > 0 )
1985	{
1986	uip_add_rcv_nxt( uip_len );
1987	}
1988
1989	if( BUF->flags & TCP_FIN )
1990	{
1991	uip_connr->tcpstateflags = UIP_TIME_WAIT;
1992	uip_connr->timer = 0;
1993	uip_add_rcv_nxt( 1 );
1994	uip_flags = UIP_CLOSE;
1995	UIP_APPCALL();
1996	goto tcp_send_ack;
1997	}
1998
1999	if( uip_len > 0 )
2000	{
2001	goto tcp_send_ack;
2002	}
2003
2004	goto drop;
2005
2006	case UIP_TIME_WAIT:
2007	goto tcp_send_ack;
2008
2009	case UIP_CLOSING:
2010	if( uip_flags & UIP_ACKDATA )
2011	{
2012	uip_connr->tcpstateflags = UIP_TIME_WAIT;
2013	uip_connr->timer = 0;
2014	}
2015	}
2016
2017	goto drop;
2018
2019	/* We jump here when we are ready to send the packet, and just want
2020	to set the appropriate TCP sequence numbers in the TCP header. */
2021	tcp_send_ack:
2022	BUF->flags = TCP_ACK;
2023	tcp_send_nodata:
2024	uip_len = UIP_IPTCPH_LEN;
2025	tcp_send_noopts:
2026	BUF->tcpoffset = ( UIP_TCPH_LEN / 4 ) << 4;
2027	tcp_send:
2028	/* We're done with the input processing. We are now ready to send a
2029	reply. Our job is to fill in all the fields of the TCP and IP
2030	headers before calculating the checksum and finally send the
2031	packet. */
2032	BUF->ackno[0] = uip_connr->rcv_nxt[0];
2033	BUF->ackno[1] = uip_connr->rcv_nxt[1];
2034	BUF->ackno[2] = uip_connr->rcv_nxt[2];
2035	BUF->ackno[3] = uip_connr->rcv_nxt[3];
2036
2037	BUF->seqno[0] = uip_connr->snd_nxt[0];
2038	BUF->seqno[1] = uip_connr->snd_nxt[1];
2039	BUF->seqno[2] = uip_connr->snd_nxt[2];
2040	BUF->seqno[3] = uip_connr->snd_nxt[3];
2041
2042	BUF->proto = UIP_PROTO_TCP;
2043
2044	BUF->srcport = uip_connr->lport;
2045	BUF->destport = uip_connr->rport;
2046
2047	uip_ipaddr_copy( BUF->srcipaddr, uip_hostaddr );
2048	uip_ipaddr_copy( BUF->destipaddr, uip_connr->ripaddr );
2049
2050	if( uip_connr->tcpstateflags & UIP_STOPPED )
2051	{
2052	/* If the connection has issued uip_stop(), we advertise a zero
2053	window so that the remote host will stop sending data. */
2054	BUF->wnd[0] = BUF->wnd[1] = 0;
2055	}
2056	else
2057	{
2058	BUF->wnd[0] = ( (UIP_RECEIVE_WINDOW) >> 8 );
2059	BUF->wnd[1] = ( (UIP_RECEIVE_WINDOW) & 0xff );
2060	}
2061
2062	tcp_send_noconn:
2063	BUF->ttl = UIP_TTL;
2064	#if UIP_CONF_IPV6
2065
2066	/* For IPv6, the IP length field does not include the IPv6 IP header
2067	length. */
2068	BUF->len[0] = ( (uip_len - UIP_IPH_LEN) >> 8 );
2069	BUF->len[1] = ( (uip_len - UIP_IPH_LEN) & 0xff );
2070	#else /* UIP_CONF_IPV6 */
2071	BUF->len[0] = ( uip_len >> 8 );
2072	BUF->len[1] = ( uip_len & 0xff );
2073	#endif /* UIP_CONF_IPV6 */
2074
2075	BUF->urgp[0] = BUF->urgp[1] = 0;
2076
2077	/* Calculate TCP checksum. */
2078	BUF->tcpchksum = 0;
2079	BUF->tcpchksum = ~( uip_tcpchksum() );
2080
2081	#if UIP_UDP
2082	ip_send_nolen :
2083	#endif
2084	#if UIP_CONF_IPV6
2085	BUF->vtc = 0x60;
2086	BUF->tcflow = 0x00;
2087	BUF->flow = 0x00;
2088	#else /* UIP_CONF_IPV6 */
2089	BUF->vhl = 0x45;
2090	BUF->tos = 0;
2091	BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
2092	++ipid;
2093	BUF->ipid[0] = ipid >> 8;
2094	BUF->ipid[1] = ipid & 0xff;
2095
2096	/* Calculate IP checksum. */
2097	BUF->ipchksum = 0;
2098	BUF->ipchksum = ~( uip_ipchksum() );
2099	DEBUG_PRINTF( "uip ip_send_nolen: chkecum 0x%04x\n", uip_ipchksum() );
2100	#endif /* UIP_CONF_IPV6 */
2101
2102	UIP_STAT( ++uip_stat.tcp.sent );
2103	send:
2104	DEBUG_PRINTF( "Sending packet with length %d (%d)\n", uip_len, (BUF->len[0] << 8) \| BUF->len[1] );
2105
2106	UIP_STAT( ++uip_stat.ip.sent );
2107
2108	/* Return and let the caller do the actual transmission. */
2109	uip_flags = 0;
2110	return;
2111	drop:
2112	uip_len = 0;
2113	uip_flags = 0;
2114	return;
2115	}
2116
2117	/---------------------------------------------------------------------------/
2118	u16_t htons( u16_t val )
2119	{
2120	return HTONS( val );
2121	}
2122
2123	/---------------------------------------------------------------------------/
2124	void uip_send( const void *data, int len )
2125	{
2126	if( len > 0 )
2127	{
2128	uip_slen = len;
2129	if( data != uip_sappdata )
2130	{
2131	memcpy( uip_sappdata, (data), uip_slen );
2132	}
2133	}
2134	}
2135
2136	/---------------------------------------------------------------------------/
2137	int uip_fast_send( int xARP )
2138	{
2139	( void ) xARP;
2140	#if NOT_YET_COMPLETE
2141
2142	u16_t tcplen, len1 = 0, uiAccumulatedLen = 0, len_previous = 0, split_len;
2143	int iSplitNo = 0;
2144	extern int uip_low_level_output( unsigned char *pcBuf, int ilen );
2145
2146	if( xARP == pdTRUE )
2147	{
2148	if( BUF->proto == UIP_PROTO_TCP && uip_slen > 1 )
2149	{
2150	tcplen = uip_len - UIP_TCPIP_HLEN;
2151
2152	if( tcplen > UIP_TCP_MSS )
2153	{
2154	split_len = UIP_TCP_MSS;
2155	}
2156	else
2157	{
2158	split_len = tcplen / 2;
2159	}
2160
2161	while( tcplen > 0 )
2162	{
2163	uiAccumulatedLen += len1;
2164
2165	if( tcplen > split_len )
2166	{
2167	len1 = split_len;
2168	tcplen -= split_len;
2169	}
2170	else
2171	{
2172	len1 = tcplen;
2173	tcplen = 0;
2174	}
2175
2176	uip_len = len1 + UIP_TCPIP_HLEN;
2177	BUF->len[0] = uip_len >> 8;
2178	BUF->len[1] = uip_len & 0xff;
2179	if( iSplitNo == 0 )
2180	{
2181	iSplitNo++;
2182
2183	/* Create the first packet. This is done by altering the length
2184	field of the IP header and updating the checksums. */
2185	}
2186	else
2187	{
2188	/* Now, create the second packet. To do this, it is not enough to
2189	just alter the length field, but we must also update the TCP
2190	sequence number and point the uip_appdata to a new place in
2191	memory. This place is determined by the length of the first
2192	packet (len1). */
2193
2194	/* uip_appdata += len1;*/
2195	memcpy( uip_appdata, ( u8_t * ) uip_appdata + uiAccumulatedLen, len1 );
2196	uip_add32( BUF->seqno, len_previous );
2197	BUF->seqno[0] = uip_acc32[0];
2198	BUF->seqno[1] = uip_acc32[1];
2199	BUF->seqno[2] = uip_acc32[2];
2200	BUF->seqno[3] = uip_acc32[3];
2201	}
2202
2203	/* Recalculate the TCP checksum. */
2204	BUF->tcpchksum = 0;
2205	BUF->tcpchksum = ~( uip_tcpchksum() );
2206
2207	/* Recalculate the IP checksum. */
2208	BUF->ipchksum = 0;
2209	BUF->ipchksum = ~( uip_ipchksum() );
2210
2211	/* Transmit the packet. */
2212	uip_arp_out();
2213	uip_low_level_output( uip_buf, uip_len );
2214
2215	len_previous = len1;
2216	}
2217	}
2218	else
2219	{
2220	uip_arp_out();
2221	uip_low_level_output( uip_buf, uip_len );
2222	}
2223	}
2224	else
2225	{
2226	uip_low_level_output( uip_buf, uip_len );
2227	}
2228
2229	#endif
2230	return 1;
2231	}
2232
2233	/** @} */

Note: See TracBrowser for help on using the browser.

root/webserver/example/freeRTOSexample/Demo/Common/ethernet/FreeRTOS-uIP/uip.c

Download in other formats: