root/webserver/example/freeRTOSexample/EnergyMeters/Common/Minimal/recmutex.c

/*
        FreeRTOS V5.4.1 - Copyright (C) 2009 Real Time Engineers Ltd.

        This file is part of the FreeRTOS distribution.

        FreeRTOS is free software; you can redistribute it and/or modify it     under 
        the terms of the GNU General Public License (version 2) as published by the 
        Free Software Foundation and modified by the FreeRTOS exception.
        **NOTE** The exception to the GPL is included to allow you to distribute a
        combined work that includes FreeRTOS without being obliged to provide the 
        source code for proprietary components outside of the FreeRTOS kernel.  
        Alternative commercial license and support terms are also available upon 
        request.  See the licensing section of http://www.FreeRTOS.org for full 
        license details.

        FreeRTOS is distributed in the hope that it will be useful,     but WITHOUT
        ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
        FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
        more details.

        You should have received a copy of the GNU General Public License along
        with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
        Temple Place, Suite 330, Boston, MA  02111-1307  USA.


        ***************************************************************************
        *                                                                         *
        * Looking for a quick start?  Then check out the FreeRTOS eBook!          *
        * See http://www.FreeRTOS.org/Documentation for details                   *
        *                                                                         *
        ***************************************************************************

        1 tab == 4 spaces!

        Please ensure to read the configuration and relevant port sections of the
        online documentation.

        http://www.FreeRTOS.org - Documentation, latest information, license and
        contact details.

        http://www.SafeRTOS.com - A version that is certified for use in safety
        critical systems.

        http://www.OpenRTOS.com - Commercial support, development, porting,
        licensing and training services.
*/

/*
        The tasks defined on this page demonstrate the use of recursive mutexes.

        For recursive mutex functionality the created mutex should be created using
        xSemaphoreCreateRecursiveMutex(), then be manipulated
        using the xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() API
        functions.

        This demo creates three tasks all of which access the same recursive mutex:

        prvRecursiveMutexControllingTask() has the highest priority so executes 
        first and grabs the mutex.  It then performs some recursive accesses - 
        between each of which it sleeps for a short period to let the lower 
        priority tasks execute.  When it has completed its demo functionality
        it gives the mutex back before suspending itself.

        prvRecursiveMutexBlockingTask() attempts to access the mutex by performing
        a blocking 'take'.  The blocking task has a lower priority than the 
        controlling     task so by the time it executes the mutex has already been
        taken by the controlling task,  causing the blocking task to block.  It 
        does not unblock until the controlling task has given the mutex back, 
        and it does not actually run until the controlling task has suspended 
        itself (due to the relative priorities).  When it eventually does obtain
        the mutex all it does is give the mutex back prior to also suspending 
        itself.  At this point both the controlling task and the blocking task are 
        suspended.

        prvRecursiveMutexPollingTask() runs at the idle priority.  It spins round
        a tight loop attempting to obtain the mutex with a non-blocking call.  As
        the lowest priority task it will not successfully obtain the mutex until
        both the controlling and blocking tasks are suspended.  Once it eventually 
        does obtain the mutex it first unsuspends both the controlling task and
        blocking task prior to giving the mutex back - resulting in the polling
        task temporarily inheriting the controlling tasks priority.
*/

/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
#include "semphr.h"

/* Demo app include files. */
#include "recmutex.h"

/* Priorities assigned to the three tasks. */
#define recmuCONTROLLING_TASK_PRIORITY  ( tskIDLE_PRIORITY + 2 )
#define recmuBLOCKING_TASK_PRIORITY             ( tskIDLE_PRIORITY + 1 )
#define recmuPOLLING_TASK_PRIORITY              ( tskIDLE_PRIORITY + 0 )

/* The recursive call depth. */
#define recmuMAX_COUNT                                  ( 10 )

/* Misc. */
#define recmuSHORT_DELAY                                ( 20 / portTICK_RATE_MS )
#define recmuNO_DELAY                                   ( ( portTickType ) 0 )
#define recmuTWO_TICK_DELAY                             ( ( portTickType ) 2 )

/* The three tasks as described at the top of this file. */
static void prvRecursiveMutexControllingTask( void *pvParameters );
static void prvRecursiveMutexBlockingTask( void *pvParameters );
static void prvRecursiveMutexPollingTask( void *pvParameters );

/* The mutex used by the demo. */
static xSemaphoreHandle xMutex;

/* Variables used to detect and latch errors. */
static volatile portBASE_TYPE xErrorOccurred = pdFALSE, xControllingIsSuspended = pdFALSE, xBlockingIsSuspended = pdFALSE;
static volatile unsigned portBASE_TYPE uxControllingCycles = 0, uxBlockingCycles, uxPollingCycles = 0;

/* Handles of the two higher priority tasks, required so they can be resumed 
(unsuspended). */
static xTaskHandle xControllingTaskHandle, xBlockingTaskHandle;

/*-----------------------------------------------------------*/

void vStartRecursiveMutexTasks( void )
{
        /* Just creates the mutex and the three tasks. */

        xMutex = xSemaphoreCreateRecursiveMutex();

        /* vQueueAddToRegistry() adds the mutex to the registry, if one is
        in use.  The registry is provided as a means for kernel aware 
        debuggers to locate mutex and has no purpose if a kernel aware debugger
        is not being used.  The call to vQueueAddToRegistry() will be removed
        by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is 
        defined to be less than 1. */
        vQueueAddToRegistry( ( xQueueHandle ) xMutex, ( signed portCHAR * ) "Recursive_Mutex" );


        if( xMutex != NULL )
        {
                xTaskCreate( prvRecursiveMutexControllingTask, ( signed portCHAR * ) "Rec1", configMINIMAL_STACK_SIZE, NULL, recmuCONTROLLING_TASK_PRIORITY, &xControllingTaskHandle );
        xTaskCreate( prvRecursiveMutexBlockingTask, ( signed portCHAR * ) "Rec2", configMINIMAL_STACK_SIZE, NULL, recmuBLOCKING_TASK_PRIORITY, &xBlockingTaskHandle );
        xTaskCreate( prvRecursiveMutexPollingTask, ( signed portCHAR * ) "Rec3", configMINIMAL_STACK_SIZE, NULL, recmuPOLLING_TASK_PRIORITY, NULL );
        }
}
/*-----------------------------------------------------------*/

static void prvRecursiveMutexControllingTask( void *pvParameters )
{
unsigned portBASE_TYPE ux;

        /* Just to remove compiler warning. */
        ( void ) pvParameters;

        for( ;; )
        {
                /* Should not be able to 'give' the mutex, as we have not yet 'taken'
                it. */
                if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )
                {
                        xErrorOccurred = pdTRUE;
                }

                for( ux = 0; ux < recmuMAX_COUNT; ux++ )
                {
                        /* We should now be able to take the mutex as many times as
                        we like.  A one tick delay is used so the polling task will
                        inherit our priority on all but the first cycle of this task. 
                        If we did not block attempting to receive the mutex then no
                        priority inheritance would occur. */
                        if( xSemaphoreTakeRecursive( xMutex, recmuTWO_TICK_DELAY ) != pdPASS )
                        {
                                xErrorOccurred = pdTRUE;
                        }

                        /* Ensure the other task attempting to access the mutex (and the
                        other demo tasks) are able to execute. */
                        vTaskDelay( recmuSHORT_DELAY );
                }

                /* For each time we took the mutex, give it back. */
                for( ux = 0; ux < recmuMAX_COUNT; ux++ )
                {
                        /* Ensure the other task attempting to access the mutex (and the
                        other demo tasks) are able to execute. */
                        vTaskDelay( recmuSHORT_DELAY );

                        /* We should now be able to give the mutex as many times as we
                        took it. */
                        if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
                        {
                                xErrorOccurred = pdTRUE;
                        }
                }

                /* Having given it back the same number of times as it was taken, we
                should no longer be the mutex owner, so the next give sh ould fail. */
                if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )
                {
                        xErrorOccurred = pdTRUE;
                }

                /* Keep count of the number of cycles this task has performed so a 
                stall can be detected. */
                uxControllingCycles++;

                /* Suspend ourselves to the blocking task can execute. */
                xControllingIsSuspended = pdTRUE;
                vTaskSuspend( NULL );
                xControllingIsSuspended = pdFALSE;
        }
}
/*-----------------------------------------------------------*/

static void prvRecursiveMutexBlockingTask( void *pvParameters )
{
        /* Just to remove compiler warning. */
        ( void ) pvParameters;

        for( ;; )
        {
                /* Attempt to obtain the mutex.  We should block until the 
                controlling task has given up the mutex, and not actually execute
                past this call until the controlling task is suspended. */
                if( xSemaphoreTakeRecursive( xMutex, portMAX_DELAY ) == pdPASS )
                {
                        if( xControllingIsSuspended != pdTRUE )
                        {
                                /* Did not expect to execute until the controlling task was
                                suspended. */
                                xErrorOccurred = pdTRUE;
                        }
                        else
                        {
                                /* Give the mutex back before suspending ourselves to allow
                                the polling task to obtain the mutex. */
                                if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
                                {
                                        xErrorOccurred = pdTRUE;
                                }

                                xBlockingIsSuspended = pdTRUE;
                                vTaskSuspend( NULL );
                                xBlockingIsSuspended = pdFALSE;
                        }
                }
                else
                {
                        /* We should not leave the xSemaphoreTakeRecursive() function
                        until the mutex was obtained. */
                        xErrorOccurred = pdTRUE;
                }

                /* The controlling and blocking tasks should be in lock step. */
                if( uxControllingCycles != ( uxBlockingCycles + 1 ) )
                {
                        xErrorOccurred = pdTRUE;
                }

                /* Keep count of the number of cycles this task has performed so a 
                stall can be detected. */
                uxBlockingCycles++;
        }
}
/*-----------------------------------------------------------*/

static void prvRecursiveMutexPollingTask( void *pvParameters )
{
        /* Just to remove compiler warning. */
        ( void ) pvParameters;

        for( ;; )
        {
                /* Keep attempting to obtain the mutex.  We should only obtain it when
                the blocking task has suspended itself. */
                if( xSemaphoreTakeRecursive( xMutex, recmuNO_DELAY ) == pdPASS )
                {
                        /* Is the blocking task suspended? */
                        if( xBlockingIsSuspended != pdTRUE )
                        {
                                xErrorOccurred = pdTRUE;
                        }
                        else
                        {
                                /* Keep count of the number of cycles this task has performed so 
                                a stall can be detected. */
                                uxPollingCycles++;

                                /* We can resume the other tasks here even though they have a
                                higher priority than the polling task.  When they execute they
                                will attempt to obtain the mutex but fail because the polling
                                task is still the mutex holder.  The polling task (this task)
                                will then inherit the higher priority. */                               
                                vTaskResume( xBlockingTaskHandle );
                vTaskResume( xControllingTaskHandle );
                        
                                /* Release the mutex, disinheriting the higher priority again. */
                                if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
                                {
                                        xErrorOccurred = pdTRUE;
                                }
                        }
                }

                #if configUSE_PREEMPTION == 0
                {
                        taskYIELD();
                }
                #endif
        }
}
/*-----------------------------------------------------------*/

/* This is called to check that all the created tasks are still running. */
portBASE_TYPE xAreRecursiveMutexTasksStillRunning( void )
{
portBASE_TYPE xReturn;
static unsigned portBASE_TYPE uxLastControllingCycles = 0, uxLastBlockingCycles = 0, uxLastPollingCycles = 0;

        /* Is the controlling task still cycling? */
        if( uxLastControllingCycles == uxControllingCycles )
        {
                xErrorOccurred = pdTRUE;
        }
        else
        {
                uxLastControllingCycles = uxControllingCycles;
        }

        /* Is the blocking task still cycling? */
        if( uxLastBlockingCycles == uxBlockingCycles )
        {
                xErrorOccurred = pdTRUE;
        }
        else
        {
                uxLastBlockingCycles = uxBlockingCycles;
        }

        /* Is the polling task still cycling? */
        if( uxLastPollingCycles == uxPollingCycles )
        {
                xErrorOccurred = pdTRUE;
        }
        else
        {
                uxLastPollingCycles = uxPollingCycles;
        }

        if( xErrorOccurred == pdTRUE )
        {
                xReturn = pdFAIL;
        }
        else
        {
                xReturn = pdTRUE;
        }

        return xReturn;
}