root


Mode:

Legend:

Added
Modified
Copied or renamed
Rev Chgset Date Author Log Message
(edit) @70 [70] 10/17/10 18:13:03 phil we now query and display the solar yields of the previous days (day - 1) …
(edit) @69 [69] 09/18/10 13:47:23 phil progress update: additional states. now reads sample month yield data
(edit) @68 [68] 09/12/10 19:33:03 phil query time once per minute now works. more detailled output on FSM stuck …
(edit) @67 [67] 09/04/10 17:14:00 phil made 2 byte rx checksum check general (now used for wattage, voltage and …
(edit) @66 [66] 09/04/10 15:30:17 phil introduced 2 byte checksum check for rx momentary power packets, including …
(edit) @65 [65] 09/04/10 12:33:34 phil fixed compilation issue in portmacro.h for new CrossWorks? …
(edit) @64 [64] 09/04/10 10:32:00 phil neues Backup Buchhaltung
(edit) @63 [63] 04/11/10 16:05:26 phil buchfuehrung solaranlage (7zip verschluesselt)
(edit) @62 [62] 04/11/10 15:53:09 phil Solar Buchhaltung folder created
(edit) @61 [61] 04/06/10 20:20:57 phil solar power history size now 20 (3 second increments)
(edit) @60 [60] 04/04/10 10:49:44 phil meter value calculation now not in ISR anymore, introduced …
(edit) @59 [59] 03/20/10 13:24:05 phil adaptation to new ETT 4 channel opto I/O board
(edit) @58 [58] 03/07/10 13:35:12 phil - solar history now in reverse direction - do not invalidate whole history …
(edit) @57 [57] 03/07/10 11:21:08 phil completed solar history entries
(edit) @56 [56] 03/07/10 10:45:29 phil - added watt history, SOLAR_WATT_HISTORY_STEPSIZE, …
(edit) @55 [55] 02/27/10 10:38:42 phil - increased cCountBuf to 800 bytes to prevent mem corruption - increased …
(edit) @54 [54] 02/27/10 09:54:56 phil switched some outputs on web page to unsigned in printf
(edit) @53 [53] 02/21/10 13:21:41 phil added watchdog
(edit) @52 [52] 02/20/10 11:31:33 phil changed UIP_ARPTAB_SIZE (from 20 to 30), removed P0.2 (not connected)
(edit) @51 [51] 02/18/10 22:55:34 phil changed UIP_ARPTAB_SIZE (from 8 to 20), changed UIP_UDP_CONNS (10 to …
(edit) @50 [50] 02/14/10 16:25:17 phil added meters AU1 and AU2 (Auxiliary 1 and Auxiliary 2), interrupt handler …
(edit) @49 [49] 02/14/10 14:46:08 phil inserted extra crlf for TSTmeter output
(edit) @48 [48] 02/14/10 14:39:48 phil fixed meter output
(edit) @47 [47] 02/14/10 13:59:45 phil - now three meter entries: TST, GAS, EL1, EL2 - added CurrentTime? to web …
(edit) @46 [46] 02/07/10 11:36:21 phil have now got METER_INDEX_BUTTON and METER_INDEX_GAS with display on page
(edit) @45 [45] 02/07/10 11:28:03 phil example meter (button SPI LOAD) now on web page, removed LCD writing in …
(edit) @44 [44] 02/04/10 20:29:58 phil serial init now only once at startup (not at every solar read error), …
(edit) @43 [43] 02/01/10 22:24:48 phil merge with other version (from laptop): changed handleGasMeterTick() …
(edit) @42 [42] 02/01/10 22:01:35 phil merge with other version (from laptop) - now interrupts for more channels, …
(edit) @41 [41] 02/01/10 19:45:22 phil output of voltages and one meter (gas meter) now works.
(edit) @40 [40] 01/31/10 18:54:41 phil ignore map file and .ld file
(edit) @39 [39] 01/31/10 18:53:49 phil - added output function for Voltages and Wattages to generate_rtos_stats …
(edit) @38 [38] 01/31/10 13:37:46 phil reverted httpd-cgi.c to unmodified state
(edit) @37 [37] 01/31/10 12:44:23 phil - SolarCount? data reading now working. Still hangs sometimes on Rx Data …
(edit) @36 [36] 01/03/10 12:49:03 phil added purchased FreeRTOS book
(edit) @35 [35] 01/03/10 11:19:00 phil first round now works
(edit) @34 [34] 01/02/10 15:33:13 phil added Code for SolarCount?, works sometimes already! :-)
(edit) @33 [33] 08/17/09 21:35:48 phil always use Fast IO for LCD
(edit) @32 [32] 08/14/09 23:28:59 phil completed the gas meter calculation algorithm
(edit) @31 [31] 08/14/09 17:44:57 phil Renamed solution
(edit) @30 [30] 08/14/09 14:29:20 phil Gas Meter counting finished, with accumulation timer and debounce timer. …
(edit) @29 [29] 08/14/09 13:42:29 phil Renamed Directpry freeRTOSexample to EnergyMeters?
(edit) @28 [28] 08/14/09 13:40:46 phil Renamed Project to EnergyMeters? in CrossWorks? Project File
(edit) @27 [27] 08/14/09 13:38:41 phil Renamed Project Files
(edit) @26 [26] 08/14/09 13:37:42 phil Renamed Dir Demo to EnergyMeters?
(edit) @25 [25] 08/14/09 13:36:52 phil Removed failed dir copy
(edit) @24 [24] 08/14/09 13:25:53 phil Renamed Project
(edit) @23 [23] 08/14/09 11:26:07 phil added some dirs to ignore list
(edit) @22 [22] 08/14/09 11:24:55 phil deleted some test files, gas meter values (unsigned long long) now …
(edit) @21 [21] 08/14/09 11:21:56 phil xTickCount not static anymore, used by Meters
(edit) @20 [20] 08/12/09 17:34:50 phil deleted unnecessary dirs FreeRTOS-uIP, IwIP and IwIP_130.
(edit) @19 [19] 08/12/09 10:41:35 phil first display of button presses, stubs for calculations, removed calls of …
(edit) @18 [18] 08/10/09 11:19:15 phil renamed folder
(edit) @17 [17] 08/10/09 11:12:44 phil adaptated example for LED flash to ETT eval board with 1 LED …
(edit) @16 [16] 08/10/09 10:59:45 phil reduced UIP_CONF_MAX_* settings to save ram
(edit) @15 [15] 08/10/09 10:58:19 phil adaptated ethernet driver to supplied includes
(edit) @14 [14] 08/10/09 08:17:47 phil added unmodified FreeRTOS package V5.4.1 with only web srv demo source for …
(edit) @13 [13] 06/14/09 16:09:08 phil Crossworks Lib Example (multiple tasks)
(edit) @12 [12] 06/14/09 08:54:46 phil Added Interrupt Enable Commamnd. RAM Debug, Flash Release working (still …
(edit) @11 [11] 06/14/09 08:00:49 phil Switched project dirs
(edit) @10 [10] 06/12/09 13:08:31 phil First compileable version of EasyWeb? for CrossWorks? ARM Compiler, without …
(edit) @9 [9] 06/12/09 12:59:37 phil EasyWEB example for uVision (original from CD)
(edit) @8 [8] 06/12/09 12:51:31 phil Added Examples etc. from CD
(edit) @7 [7] 06/12/09 12:47:58 phil --
(edit) @6 [6] 06/12/09 12:39:31 phil --
(edit) @5 [5] 06/12/09 12:37:55 phil --
(edit) @4 [4] 06/12/09 12:37:38 phil --
(edit) @3 [3] 06/12/09 12:36:59 phil --
(edit) @2 [2] 06/12/09 12:36:46 phil --
(add) @1 [1] 06/12/09 12:36:36 phil --
Note: See TracRevisionLog for help on using the revision log.